Polymer Property : Izod Impact, Notched = 0.250 J/cm Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
SABIC PP 500P Polypropylene Homopolymer for Raffia Applications Product Description: PP 500P is specially developed for producing stretched tapes with the following features:Consistent processabilityEasy orientationLow water carry overGood mechanical properties..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
SABIC PP 526P Polypropylene Homopolymer for Cast Film Product Description: PP 526P is specially developed for cast film applications for producing clear films and does not contain slip or antiblock additives.Films produced using PP 526P will exhibit:C..
Izod Impact, Notched	0.250 - 0.350 J/cm	0.468 - 0.656 ft-lb/in	ASTM D256-06
Proto3000 Objet Digital Materials™ DM_8425 Rigid Opaque Prototyping Polymer Primary material: VeroWhitePlusSecondary material: TangoPlusDigital Materials are made up of two Objet materials. The two materials are combined in specific concentrations and structures, to provide..
Izod Impact, Notched	>= 0.250 J/cm @Temperature 23.0 °C	>= 0.468 ft-lb/in @Temperature 73.4 °F	ASTM D256
NIZHNEKAMSKNEFTEKHIM PP 1500P (V30G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P..
Izod Impact, Notched	0.250 - 6.41 J/cm	0.468 - 12.0 ft-lb/in	Average value: 1.05 J/cm Grade Count:69
Overview of materials for Polybutylene Terephthalate (PBT), Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Flame Retardant". Each property range of values reported is minimum an..
Izod Impact, Notched	0.250 J/cm @Temperature -30.0 °C	0.468 ft-lb/in @Temperature -22.0 °F	ASTM D256A
Total Finaclear® 521 Clear Impact Polystyrene (discontinued **) Finaclear® 521 is a clear high styrenic styrene-butadiene (SBS) elastomer, providing dramatically improved impact properties and tear resistance to finished articles, when used in blends with othe..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Ineos Nova Zylar® 330 Clear Impact Modified Acrylic Copolymer (discontinued **) Features:Clarity and stiffness Good heat distortion resistance Styrenic processing advantages Excellent property retention after gamma and ETO sterilization Meets USP XXIII specifications for Class ..
Izod Impact, Notched	0.250 J/cm @Temperature 23.0 °C	0.468 ft-lb/in @Temperature 73.4 °F	ASTM D256
Reliance Industries Repol H250FG Polypropylene REPOL Polypropylene H250FG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Perstorp Compounds Akestra™ 90 Thermoplastic Copolyester Akestra™ is a thermoplastic with a sparkling glass-like appearance. It can be used as a polystyrene alternative for heat resistant thin wall containers, a polycarbonate alternative for durable “di..
Izod Impact, Notched	0.250 - 5340 J/cm	0.468 - 10000 ft-lb/in	Average value: 3.49 J/cm Grade Count:74
Overview of materials for High Density Polyethylene (HDPE), Blow Molding Grade This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Blow Molding Grade". Each property range of values reported is minimum..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in
Cookson Group Plaskon® 3100 Novolac Epoxy Molding Compound (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.A flame retardant, novolac-hardened epoxy molding compound recommended for semiconductor packages that are not stress sensitive.
Izod Impact, Notched	0.250 - 2.60 J/cm	0.468 - 4.87 ft-lb/in	Average value: 0.673 J/cm Grade Count:24
Overview of materials for Nylon 6, 30% Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 30% Mineral Filled". Specific grades with primary filler content between 25% and 34% are includ..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Plenco Valite 697-A Novolac Phenolic, Granular, Compression Molded (discontinued **) This Valite product has been replaced by Plenco 7697. Data provided by Plenco.VALITE 697-A is a black, two stage, improved impact phenolic molding compound. It has been specifically formulated for ..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Iran Petrochemical (PCC) HB0035 High Density Polyethylene HB0035 is a high molecular weight high density polyethylene blow molding grade combining blow molding extrusion behavior and superior mechanical properties. Blow molded items made from HB 0035 exhi..
Izod Impact, Notched	0.250 - 0.350 J/cm	0.468 - 0.656 ft-lb/in	ASTM D256
Loxim 830 02C HB Polypropylene Compound, 30% Calcite Filled, Flame Retardant Information provided by Loxim Industries
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Mitsui APELâ„¢ APL6013T Cyclo Olefin Copolymer (COC) This material possesses many characteristics inherent in polyolefins such as excellent electrical insulating properties and outstanding moisture resistance. In addition, it features good melt proces..
Izod Impact, Notched	0.250 J/cm @Temperature 23.0 Â°C	0.468 ft-lb/in @Temperature 73.4 Â°F	ASTM D 256
SABIC Innovative Plastics LNP Thermocomp OK006 PPS - Linear LNP* Thermocomp* OK006 is based on a Linear Polyphenylene Sulfide (PPS) containing Talc.This data was supplied by SABIC-IP for the Americas region.
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
A. Schulman POLYFORT™ FXP 3000-3120 Glass Sphere Filled Copolymer Polypropylene DescriptionPolyfort® FXP 3000-3120 is a 30% glass sphere filled copolymer polypropylene compound.Information provided by A. Schulman.
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Goodfellow TPX® DX310 Coating/Extrusion Grade Polymethylpentene This grade is highly recommended for paper coating or for fiber extrusion.TPX® is semi-crystalline, transparent, very light and - for a polyolefin - expensive. It has good release characteristics a..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Braskem Green PE SHA7260 Injection Molding High Density Polyethylene Description: SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness...
Izod Impact, Notched	0.250 J/cm @Temperature 23.0 °C	0.468 ft-lb/in @Temperature 73.4 °F	ASTM D256A
Braskem H 103 Injection Molding Polypropylene Applications: Thin-walled parts and easy mould filling; food and cosmetic packing; toys and household; sealed closures. Information provided by Braskem
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM-D256
Braskem H 216 HOMO Polypropylene Homopolymer H 216 is a high melt flow rate homopolymer with narrow molecular weight distribution. It is designed for fiber extrusion processing with high toughness fibers. H 216 exhibits excellent processabilit..
Izod Impact, Notched	0.250 - 0.400 J/cm	0.468 - 0.749 ft-lb/in	IS 13411-1992
Amity Thermosets ATO 142 Phenolic Molding Organic Filler, Compression Molded Characteristics:Electrical low loss Good mechanical strengthHigh electrical insulationGood mechanical strengthGlossy surfaceLow water absorptionColor-black, brownMedium/hard flow Applications: Elec..
Izod Impact, Notched	0.250 - 0.400 J/cm	0.468 - 0.749 ft-lb/in	IS 13411-1992
Amity Thermosets ATS 1612 Phenolic Molding Nylon, inorganic, and glass Filler, Compression Molded Characteristics:High dielectric & mechanical strengthWeather resistant Good electric insulationLow water absorption Good mechanical tension bearing capacityColor-blackSoft/Medium flow Applications:R..
Izod Impact, Notched	0.250 - 0.300 J/cm	0.468 - 0.562 ft-lb/in	IS 13411-1992
Amity Thermosets ATS 1613-R Phenolic Molding Nylon and glass Filler, Compression Molded Characteristics:High dielectric & mechanical strengthWeather resistant Good electric insulationLow water absorption Good mechanical tension bearing capacityColor-blackMedium flow Applications:Railwa..
Izod Impact, Notched	0.250 - 0.400 J/cm	0.468 - 0.749 ft-lb/in	IS 13411-1992
Amity Thermosets ATS 1613-G Phenolic Molding Nylon and inorganic Filler, Compression Molded Characteristics:High dielectric & mechanical strengthWeather resistant Good electric insulationLow water absorption Good mechanical tension bearing capacityColor-blackSoft/Medium flow Applications:R..
Izod Impact, Notched	0.250 J/cm @Temperature 23.0 °C	0.468 ft-lb/in @Temperature 73.4 °F	ASTM D256A
Braskem H 306 Injection Molding Polypropylene Description: H 306 is a medium melt flow rate additivated homopolymer used for general purposes. It suitable for injection moulding and fiber extrusion. This product exhibits excellent processabilit..
Izod Impact, Notched	0.250 J/cm	0.468 ft-lb/in	ASTM D256
Plenco 301 Black Impact Grade Woodflour/Flock Filled Phenolic Molding Compound (discontinued **) Plaslok 301 is a two-stage, woodflour and flock-filled phenolic molding compound. It has broad molding latitude combined with good electrical properties and improved impact strength. It is particu..
Izod Impact, Notched	0.250 - 0.340 J/cm @Thickness 6.35 mm	0.468 - 0.637 ft-lb/in @Thickness 0.250 in	ASTM D256
Chang Chun Plastic PBT2000 Fire Retardant PBT Information provided by Dowell Trading Company Ltd.
Izod Impact, Notched	0.250 - 1.35 J/cm @Diameter 0.125 - 3.17 mm	0.468 - 2.53 ft-lb/in @Diameter 0.00492 - 0.125 in	Average value: 0.794 J/cm Grade Count:11
Overview of materials for Polypropylene, Impact Modified; Molded/Extruded This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Impact Modified; Molded/Extruded". Each property range of values reported is minimum and ..