Polymer Property : Charpy Impact, Notched = 2.30 J/cm² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO179/3C DIN.53453
Omnia Plastica Omniamid PA6 G - G - at 50% RH Cast nylon 6. The method of production of this polyamide (i.e. the polymerisation of the caprolactam directly in the mould) allows the production of stock shapes in larger than normal dimensions, su..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO179/3C DIN.53453
Omnia Plastica PC Polycarbonate This amorphous polymer is commonly used for its high shock resistance even at low temperature. It is not a material recommended for mechanical applications, even if its dimensional stability does ma..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Cycolac® HMG94MD ABS Superior flow, injection molding ABS for medical applications. Good impact. For thin-wall applications. Biocompatible (ISO10993). FDA compliant. Gamma & EtO sterilizable.
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Cycolac® MG94 ABS (Europe-Africa-Middle East) Superior flow, injection molding ABS. Good impact. For thin-wall applications.
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179/1eA
Nilit FRIANYL B63 S20 Nylon 6 for injection molding Nylon 6 for injection molding, impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	ISO 179
Menzolit MenzolitÂ® BMC 2500 Unsaturated Polyester UP BMC 2500 is a special BMC for high voltage isolating applications. The glass content is set to a level that combines good mouldability with good strength and stiffness properties. The fire retardanc..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	ISO 179
Menzolit MenzolitÂ® BMC 2300 Unsaturated Polyester UP BMC 2300 is a special BMC with exceptional high fire retardancy. The glass content is set to a level that provides sufficient mouldability with high strength and stiffness properties. Fire retardanc..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	ISO 179 1eA
Lehmann & Voss LUVOCOMÂ® 100-7846 Thermoplastic polyurethane, with aramid reinforcement Applications: Improved friction and wear behaviour. Emergency running property.dynamic stressBearings, sleeves, sliding elements, chair rollers, handles.Information provided by Lehmann & Voss & Co.K..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	80104mm, Cut; ISO 179/1eA
SABIC Innovative Plastics ValoxÂ® V8030CS PBT+PET Glass filled Valox with enhanced surface
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics XenoyÂ® IQ4840 PBT+PC (Asia Pacific) Xenoy iQ4840 (PBT+PC) resin is an environmental responsible, sustainable, and low carbon footprint resin. It is a 10% mineral filled resin with high modulus and ductile (HMD) characteristics. Xen..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics XenoyÂ® IQ4840 PBT+PC (Europe-Africa-Middle East) Xenoy iQ4840 (PBT+PC) resin is an environmental responsible, sustainable, and low carbon footprint resin. It is a 10% mineral filled resin with high modulus and ductile (HMD) characteristics. Xen..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics NORYL GTX GTX942 PPE+PS+PA66 Noryl GTX* GTX942 Resin is a blend of Polyphenylene Ether(PPE) + Polyamide(PA) resin that is designed to have high melt flow for large part/thinwall injection molding. The material is designed to h..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179/1eA
Borealis Nepol™ GB303HP 30% Long Glass Fiber Reinforced Polypropylene Nepol GB303HP is a 30% long glass fiber reinforced polypropylene grade, produced using Borealis ` propriety and exclusive, patented Nepol technology intended for injection molding and extrusion. Th..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179-1
Unitika EX-1020K PA6, Conditioned Conducting nylonInformation provided by Unitika Ltd.
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²
Corbion Purac Blend C High Heat, Impact Modified Homopolymer PLA Heat resistance higher than typical PLA is achieved by addition of a nucleating agent and PDLA homopolymer. Increased impact is produced by addition of impact modifier to the base grade; a small am..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	Bayer Test
Covestro Baydur® 730 IBS Polyurethane Structural Foam RIM, Density 40 pcf, MDI-based 2-Component Liquid System 0.25 in. thickness. IBS = Interactive Blowing System RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience ..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179/1eA
DuPont Performance Polymers Delrin® 100T BK602 Acetal (POM) (Unverified Data**) Toughened High Viscosity Acetal Homopolymer Delrin 100T BK602 is a toughened high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where o..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	50%RH; ISO 179/1eA
DuPont Performance Polymers Zytel® 73G30HSL BK416 Nylon 6 (Unverified Data**) 30% Glass Reinforced Heat Stabilized Polyamide 6 Zytel 73G30HSL BK416 is a 30% glass fiber reinforced heat stabilized lubricated black polyamide 6 resin for injection molding.Information provided by..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	50%RH; ISO 179/1eA
DuPont Performance Polymers Zytel® 73G30L NC010 Nylon 6 (Unverified Data**) 30% Glass Reinforced Polyamide 6Zytel 73G30L NC010 is a 30% glass fiber reinforced polyamide 6 resin for injection molding.Information provided by DuPont Performance Polymers
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	DAM; ISO 179/1eA
DuPont Performance Polymers Zytel® 80G43HS1L BK104 Nylon 66 (Unverified Data**) 43% Glass Reinforced Toughened Heat Stabilized Polyamide 66 Zytel 80G43HS1L BK104 is a 43% glass fiber reinforced heat stabilized black polyamide 66 resin with superior impact resistance.Information..
Charpy Impact, Notched	2.30 J/cm² @Temperature -20.0 °C	10.9 ft-lb/in² @Temperature -4.00 °F	Dry; ISO 179/Af
Arkema Group Orgalloy® RS 60E10 Polyamide Alloy Polyamide Alloy, Rigid Blown film gradeTubes / Mandrels / Profiles / CablesInformation provided by Arkema Group
Charpy Impact, Notched	2.30 J/cm² @Temperature 23.0 °C	10.9 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Akro-Plastic Akromid® A3 GF 50 (2423) PA 6.6 Conditioned, 50% Glass Filled AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Charpy Impact, Notched	2.30 J/cm² @Temperature 23.0 °C	10.9 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Akro-Plastic Akromid® B3 GF 40 (2474) PA 6 Conditioned, 40% Glass Filled AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur..