Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Ball Indentation Hardness = 24700 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Ball Indentation Hardness 170 MPa
24700 psi
ISO2039.1 DIN.53456
Omnia Plastica Akulon® PA 66.6 Akulon GX - Dry
Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic tool..
Ball Indentation Hardness 170 MPa
24700 psi
ISO2039.1 DIN.53456
Omnia Plastica PEI Polyetherimide
This high performance engineering plastic is a non-reinforced self-extinguishing amorphous polymer with high thermal, electrical and mechanical properties which are typical of a crystalline polymer...
Ball Indentation Hardness 170 MPa
24700 psi
ISO2039.1 DIN.53456
Omnia Plastica Rilsan® PA6 GF - Akulon GF - at 50% RH
Polyamide 6 reinforced with the addition of 30% glass fibre and graphite. The glass charge makes the material highly resistant to abrasion, compression and flexing. Akulon GF is particularly suitabl..
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Nilit FRIANYL A63 H-SG50 Nylon 6.6 for injection molding, 50% mineral filled
Nylon 6.6 for injection molding, heat stabilized (dark natural color).Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Nilit FRIANYL A63 SG-GV 1515 Nylon 6.6 for injection molding, 15% mineral filled and 15% glass fiber reinforced
Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Quadrant EPP Ertalyte® PET, cast (ISO Data)
The specific properties of this virgin crystalline PET make it especially suitable for the manufacture of mechanical precision parts which have to sustain high loads and/or are subject to wear.
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Murtfeldt Murylat® Polyethylene Terephthalate
Thanks to its extremely low absorption of moisture and low expansion coefficient, Murylat® is ideally suited for the processing of precision parts. Murylat® has an extremely high hardness grade an..
Ball Indentation Hardness 170 MPa
24700 psi
ISO2039.1 DIN.53456
Omnia Plastica Akulon® PET Arnite Omnialite
Arnite is a relatively new semi-crystalline polymer developed for technical applications. It is suitable for mechanical parts which require dimensional stability and a low friction coefficient. Omni..
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Nilit FRIANYL A63 H-GV25 Nylon 6.6 for injection molding, 25% glass fiber reinforced
Nylon 6.6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Nilit FRIANYL A63 HH-FK 2020 Nylon 6.6 for injection molding, 20% glass fiber and 20% glass ball reinforced
Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Nilit FRIANYL A63 KV25 Nylon 6.6 for injection molding, 25% glass ball reinforced
Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Nilit FRIANYL C73 GV30 Nylon 6.6/6 for injection molding, 30% glass fiber reinforced
Nylon 6.6/6 for injection molding, medium viscosity.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1
Nilit RECONYL A KV30 Recycled nylon 6.6 for injection molding, 30% glass ball reinforced
Recycled nylon 6.6 for injection molding (available only in black).Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness 170 - 190 MPa
24700 - 27600 psi
Average value: 179 MPa Grade Count:21
Overview of materials for Acrylic, General Purpose, Molded
This property data is a summary of similar materials in the MatWeb database for the category "Acrylic, General Purpose, Molded". Each property range of values reported is minimum and maximum values ..
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039
GEHR Plastics PET Polyethylene Terephthalate
Polyethylene terephthalate shows high tensile and mechanical strength, hardness and toughness, low friction and a high dimensional stability. PET may be used at temperatures ranging from -20°C to..
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1 (H 961-30)
Lucite International Diakon® Frost 902 70 Acrylic Polymer
Information provided by Lucite International
Ball Indentation Hardness 170 MPa
24700 psi
ISO 2039-1 (H 961-30)
Lucite International Diakon® Frost 952 80 Acrylic Polymer
Information provided by Lucite International
Ball Indentation Hardness 170 MPa
24700 psi
Hc 30; ISO 2039; partially
Schwartz Technical Plastics LAMIGAMID® 200 Polyamide 66, Dry
Application: bearing bushes, machine parts, gears, linersInformation provided by Schwartz Technical Plastics GmbH
Ball Indentation Hardness 170 MPa
24700 psi
Hc 30; ISO 2039; partially
Schwartz Technical Plastics LAMINEX® 2000 Cotton Fabric, Phenolic Resin Impregnated, Coarse
Application: rollneck-bearings, coverts for friction rollsInformation provided by Schwartz Technical Plastics GmbH
Ball Indentation Hardness 170 MPa
24700 psi
Hc 30; ISO 2039; partially
Schwartz Technical Plastics LAMINEX® 2010 Cotton Fabric, Phenolic Resin Impregnated, Fine
Application: slippers, inserts for coupling boxes, rollneck bearingsInformation provided by Schwartz Technical Plastics GmbH
Ball Indentation Hardness 170 MPa
24700 psi
Hc 30; ISO 2039; partially
Schwartz Technical Plastics LAMINEX® 2040 Cotton Fabric, Phenolic Resin Impregnated, MoS2 Filled
Application: slippers, gear-rods, bushesInformation provided by Schwartz Technical Plastics GmbH
Ball Indentation Hardness 170 MPa
24700 psi
dry; ISO 2039-1
EMS-Grivory Grivory® 1SBVX-30H LDS black PA1010-GF30
Product Description: Grilamid 1SBVX-30H LDS black is a 30% glass fiber reinforced Polyamide 1010 injection molding grade. This grade is specifically optimized for the laser Direct Structuring techno..
Ball Indentation Hardness 170 MPa
24700 psi
dry; ISO 2039-1
EMS-Grivory Grivory® BG-15 PA6-GF15
Product description: Grilon BG-15 is a heat stabilized PA 6 injection molding grade with 15% glass fiber reinforcement. Grilon BG-15 has the following important properties: Good surface finishGood b..
Ball Indentation Hardness 170 MPa
24700 psi
dry; ISO 2039-1
EMS-Grivory Grivory® BG-30 EC PA6-GF30
Information provided by EMS Grivory
Ball Indentation Hardness 170 MPa
24700 psi
dry; ISO 2039-1
EMS-Grivory Grivory® BGZ-30/2 PA6-GF30
Product description: Grilon BGZ-30/2 is a heat stabilized and impact modified PA6 injection molding grade with 30% glass fibers. Grilon BGZ-30/2 has the following important properties: Good impact s..
Ball Indentation Hardness 170 MPa
24700 psi
dry; ISO 2039-1
EMS-Grivory Grivory® BM-30 PA6-MD30
Product description: Grilon BM-30 is a 30% mineral reinforced PA6 injection moulding grade. Grilon BM-30 has the following important properties: heat stabilizedimpact resistantisotropic shrinkagelig..
Ball Indentation Hardness 170 MPa
24700 psi
dry; ISO 2039-1
EMS-Grivory Grivory® BGZ-30 PA6-GF30
Product description: Grilon BGZ-30 is a normal viscosity, heat stabilized and impact modified PA 6 injection molding type with 30% glass fibers. Grilon BGZ-30 has the following important properties:..
Ball Indentation Hardness 170 MPa
24700 psi
value at 30 sec.; ISO 2039-1
CENTROPLAST CENTRO HPM Polyetherimide
This material has high strength and rigidity at high temperatures, with good electrical properties. Applications include electrical insulators, and load-bearing components.Information provided by C..
Ball Indentation Hardness 170 MPa
24700 psi
value at 30 sec.; ISO 2039-1
CENTROPLAST CENTROLYTE Polyethylene terephthalate
This material is electrically insulating, with good chemical resistance, high mechanical strength and wear resistance. Applications include pump components, coil bodies, ball bearing cups and prote..
Copyright © lookpolymers.com All Rights Reserved