Polymer Property : Ball Indentation Hardness = 14500 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	100 MPa	14500 psi	ISO2039.1 DIN.53456
Omnia Plastica Akulon® PA 66 - Akulon 66 - at 50% RH Polyamide obtained by the polymerisation of Hexamethylenediamine and Adipic acid. It is one of the oldest engineering plastics, having been created in the USA in 1930. Due to its origin it is widely..
Ball Indentation Hardness	100 MPa	14500 psi	ISO2039.1 DIN.53456
Omnia Plastica Akulon® PA 66.6 - Akulon GX - at 50% RH Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic tool..
Ball Indentation Hardness	100 MPa	14500 psi	ISO2039.1 DIN.53456
Omnia Plastica Noryl® PPO m Polyphenylenoxide Noryl is a resin based on polyphenylene oxide, modified with styrene. Its main field of application is the electrical one.Features:Good electrical properties, even at high frequency Dimensional stab..
Ball Indentation Hardness	100 MPa	14500 psi	ISO2039.1 DIN.53456
Omnia Plastica Omniamid PA6 G - G - at 50% RH Cast nylon 6. The method of production of this polyamide (i.e. the polymerisation of the caprolactam directly in the mould) allows the production of stock shapes in larger than normal dimensions, su..
Ball Indentation Hardness	100 MPa	14500 psi	ISO2039.1 DIN.53456
Omnia Plastica Omniamid PA6 GHR - HR - at 50% RH Cast nylon 6 produced with the addition of graphite and a special lubricator which gives to this product better properties than natural PA6G. Whilst retaining the general features of OMNIAMID G it i..
Ball Indentation Hardness	100 MPa	14500 psi	ISO2039.1 DIN.53456
Omnia Plastica PA 11 Rilsan B The only engineering plastic of natural origin (derived from castor oil), it is a polyamide which, unlike the other nylons, does not absorb humidity. It has all the good mechanical features of polya..
Ball Indentation Hardness	100 MPa	14500 psi	ISO2039.1 DIN.53456
Omnia Plastica PVDF Kynar PVDF is a relatively new fluoropolymer. Like the other fluoropolymers, its best feature is its chemical resistance. The mechanical features of PVDF are notably higher than PTFE and it does not suffe..
Ball Indentation Hardness	100 MPa	14500 psi	ISO 2039-1
Nilit FRIANYL A63 S20 Nylon 6.6 for injection molding Nylon 6.6 for injection molding, impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	100 MPa	14500 psi	ISO 2039-1
Nilit FRIANYL B63 L-HS-GV30 Nylon 6 for injection molding, 30% glass fiber reinforced Nylon 6 for injection molding, improved fluidity, high impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	100 MPa	14500 psi	ISO 2039-1
Nilit FRIANYL B63 S20 Nylon 6 for injection molding Nylon 6 for injection molding, impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	100 - 116 MPa	14500 - 16800 psi	Average value: 112 MPa Grade Count:21
Overview of materials for Polycarbonate, UV Stabilized This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, UV Stabilized". Each property range of values reported is minimum and maximum values of a..
Ball Indentation Hardness	100 - 325 MPa	14500 - 47100 psi	Average value: 223 MPa Grade Count:21
Overview of materials for Nylon 66/6, 40% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6, 40% Glass Fiber Reinforced". Specific grades with glass content between 35% and 44% are incl..
Ball Indentation Hardness	100 - 135 MPa	14500 - 19600 psi	Average value: 122 MPa Grade Count:3
Overview of materials for Nylon 12, Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, Carbon Fiber Filled". Each property range of values reported is minimum and maximum values of ..
Ball Indentation Hardness	100 MPa @Load 36.5 kg, Time 30.0 sec	14500 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Styrolution LuranÂ® S 757 R Colored ASA Description: General-purpose grade for injection molding with high stiffness.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
Ball Indentation Hardness	100 MPa	14500 psi	DIN 53456
Zell-Metall Engineering Plastics Zellamid 1200 G Zellamid® 1200 G is manufactured by an activated anionic reaction. Finished and semi-finished parts are produced by a static cast process. This process makes it possible to produce a material wit..
Ball Indentation Hardness	100 MPa	14500 psi	conditioned; ISO 2039-1
EMS-Grivory Grivory® BG-30 S PA6-GF30 Product description: Grilon BG-30 S is a heat stabilized PA6 injection molding grade with 30% glass fibers. Grilon BG-30 S has the following important properties: Excellent surface finishEasy flowin..
Ball Indentation Hardness	100 MPa	14500 psi	conditioned; ISO 2039-1
EMS-Grivory Grivory® BG-30/2 PA6-GF30 Product description: Grilon BG-30/2 is a heat stabilized, normal viscosity PA6 injection molding grade with 30% glass fibers. Grilon BG-30/2 has the following important properties: High stiffnessGoo..
Ball Indentation Hardness	100 MPa	14500 psi	conditioned; ISO 2039-1
EMS-Grivory Grivory® TSG-35 PA666-GF35 Information provided by EMS Grivory
Ball Indentation Hardness	100 MPa	14500 psi	conditioned; ISO 2039-1
EMS-Grivory Grivory® TSGK-30 X PA666-(GF+GB)30 Product description: Grilon TSGK-30 X is a heat stabilized PA66 + PA6 injection molding grade with a 30% reinforcement combination (glass fibers and glass beads). Grilon TSGK-30 X has the following ..
Ball Indentation Hardness	100 MPa	14500 psi	dry; ISO 2039-1
EMS-Grivory Grivory® XE 4071 black 9992 PA612 Product description: Grilamid XE 4071 BLACK 9992 is an impact modified unreinforced high viscosity polyamide 612 (PA612) extrusion grade with superior heat and hydrolysis resistance. Compared to sta..
Ball Indentation Hardness	100 MPa	14500 psi	dry; ISO 2039-1
EMS-Grivory Grivory® XE 4071 nat PA612-I Product description: Grilamid XE 4071 NATURAL is an unreinforced impact modified high viscosity polyamide 612 (PA612) extrusion grade with superior hydrolysis and heat resistance. Compared to standa..
Ball Indentation Hardness	100 MPa	14500 psi	H358/30; ISO 2039-1
Chi Mei Wonderlite® PC-110L Polycarbonate - UV Stabilized Head Lamp
Ball Indentation Hardness	100 MPa	14500 psi	ISO 2039/1,2
Ensinger TECAPRO™ SAN Polypropylene (PP) TECAFORM™ (Polyacetal) and TECAPRO™ SAN (Polypropylene), provide an additional safety factor in reducing incidence of bacterial contamination. The raw materials are charged with an antimicrobial ..
Ball Indentation Hardness	100 MPa	14500 psi	H358/30; ISO 2039-1
Chi Mei Wonderlite® PC-110N Polycarbonate - Flame Retardant Opaque
Ball Indentation Hardness	100 MPa @Load 36.5 kg	14500 psi @Load 80.5 lb	ISO 2039-1
Azoty Tarnow™ Tarnamid® T-27 MCS I Polyamide 6 - Impact Modified High impact resistance grade. Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:H..
Ball Indentation Hardness	100 - 115 MPa	14500 - 16700 psi	ISO 2032
Adamas Adalon® 453 PTFE, Mica filler Information provided by Adamas, HPM
Ball Indentation Hardness	100 - 120 MPa	14500 - 17400 psi	ISO 2032-N132
Adamas Adalon® 463 PTFE, 15% Special Polyimide Information provided by Adamas, HPM
Ball Indentation Hardness	100 MPa	14500 psi	value at 30 sec.; ISO 2039-1
CENTROPLAST CENTROFLON Polyvinylidene fluoride This material has very good chemical and temperature resistance, with good slip characteristics. Its applications include pump wheels, flanges, valve bodies, and laboratory equipment.Information pr..
Ball Indentation Hardness	100 MPa @Time 30.0 sec	14500 psi @Time 0.00833 hour	DIN 53 456
Hippe PVC-U Polyvinyl Chloride Material at reasonable price, high strength. Used in machine construction as covers, pipes, section, façade elements.Information provided by Hippe.