Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 100 MPa | 14500 psi | |
Plastcom SLOVAMID 6 FRM 1 PA6, flame retardant FeaturesDetermined for electrotechnical use. Delivered in natural mode. PA 6 for injection moulding with reduced flammability, with nonhalogen flame retardant. Excellent fluidity of the material pre.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
PolyOne Maxxam™ NT-818.G002-1000 Polypropylene, Unspecified (PP, Unspecified) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
SABIC Innovative Plastics Lexan® BFL2010 PC (Asia Pacific) Non-brominated, non-chlorinated flame retardant, glass reinforced PC with improved flow. Available in opaque colors. |
|||
Flexural Strength | 100 - 120 MPa | 14500 - 17400 psi | Compression; ISO 178 |
Raschig Group DECAL® 666/8/2B Phenolic Glass-fiber reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and mechanical properties. This product meets the allowe.. |
|||
Flexural Strength | 100 - 120 MPa | 14500 - 17400 psi | Injection; ISO 178 |
Raschig Group MELOPAS® 156 MF Melamine Glass fiber reinforced Melamine molding compound. This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 200.. |
|||
Flexural Strength | 100 - 130 MPa | 14500 - 18900 psi | Injection; ISO 178 |
Raschig Group MELOPLAS® 181.5 MF Cellulose-reinforced, phenol-modified MF molding compound (MPF) in white and colored shades. Very good electrical properties, high surface hardness, good mechanical strength, high UV and heat resis.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ISO 178 |
NOVA Chemicals Dylark® 378P15 Glass Reinforced Engineering Resin Features: Very high modulus, High heat resistance, excellent flow characteristics, excellent adhesion to urethaneApplications: Instrument panel substrates, Consoles, Cluster housings, Interior trim |
|||
Flexural Strength | 100 MPa | 14500 psi | ISO 178 |
Nilit FRIANYL A63 KV20 Nylon 6.6 for injection molding, 20% glass ball reinforced Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | 100 - 120 MPa | 14500 - 17400 psi | ISO 178 |
Raschig Group 3572 Epoxy Glass-fiber reinforced epoxy molding compound. Good mechanical strength and electrical strength, enhanced elasticity for ensuring good sealing under extreme heat and/or humidity, good chemical resis.. |
|||
Flexural Strength | 100 MPa | 14500 psi | |
Lehmann & Voss LUVOCOM® 1301-8349 PPS, linear, with PTFE Applications: Automotive industry, textile-and office machinery, medical- and precision engineering.Improved friction and wear behaviour. Emergency running property.Low warpage, isotropic shrinkage .. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
Mitsui APELâ„¢ APL5014DP Cyclo Olefin Copolymer (COC) This material possesses many characteristics inherent in polyolefins such as excellent electrical insulating properties and outstanding moisture resistance. In addition, it features good melt proces.. |
|||
Flexural Strength | 100 MPa | 14500 psi | 1.3 mm/min; ASTM D790 |
Lavergne VYTEEN PC/ABS 8515XF Polycarbonate - Acrylonitrile Butadiene Styrene Alloy Vyteen PC/ABS 8515XF is an enhanced PC/ABS alloy with balanced impact/stiffness properties designed for injection molding applications.Features: -High resilience -Excellent processability -High d.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ISO 178 |
Solvay TECHNYL® C 230 PA6, DRY Description: Unreinforced polyamide PA6, with improved impact resistance, for injection molding.Available in: EuropeProduct Applications: This grade has improved impact strength and higher flexibili.. |
|||
Flexural Strength | 100 - 130 MPa | 14500 - 18900 psi | DIN 54352 |
Schwartz Technical Plastics LAMINEX® 2010 Cotton Fabric, Phenolic Resin Impregnated, Fine Application: slippers, inserts for coupling boxes, rollneck bearingsInformation provided by Schwartz Technical Plastics GmbH |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
Techmer ES Plastiblend® PA6 NAT001 Nylon 6 Availability: North AmericaForms: PelletsFeatures: Good Processability and High FlowAppearance: NaturalTPCI# 1327102Information provided by TP Composites, Inc. |
|||
Flexural Strength | 100 MPa | 14500 psi | 2.0 mm/min (3 point); ISO 178 |
Styron CALIBREâ„¢ 703-15 Polycarbonate Resin Overview: CALIBREâ„¢ 701-15 Series resins are formulated and produced to supply both clarity and enhanced ignition resistance. They do so while maintaining excellent physical properties and proce.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
Styron EMERGEâ„¢ 4630-10 Polycarbonate EMERGEâ„¢ PC 4630-10 advanced resin is formulated to supply both excellent ultraviolet stability and enhanced ignition resistance while maintaining excellent physical properties and processabilit.. |
|||
Flexural Strength | 100 MPa | 14500 psi | 2.0 mm/min (3 point); ISO 178 |
Styron CALIBREâ„¢ 701-10 Polycarbonate Resin Overview: CALIBREâ„¢ 701-10 resin is formulated and produced to supply clarity and enhanced ignition resistance. They do so while maintaining excellent physical properties and processability. CAL.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
A. Schulman POLYFORT™ FPP 1606 Glass Filled Chemically Coupled Impact Copolymer Polypropylene DescriptionPolyfort® FPP 1606 is a 30% glass filled chemically coupled impact copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 100 MPa | 14500 psi | ISO 178-93 |
Wellman EcoLon® MRGF1619-WBK1 Mineral and Glass Reinforced Recycled Nylon 66 Description: Post Consumer Nylon Compound; WeatherableInformation provided by Wellman. |
|||
Flexural Strength | 100 MPa | 14500 psi | ISO 178 |
Polyram RamTough PZ509 Polycarbonate, Easy Flow, Flame Retardant Non-transparent polycarbonate, easy flow, flame retardant, for injection molding applications.Information provided by Polyram. |
|||
Flexural Strength | 100 MPa | 14500 psi | 2 mm/min; ISO 178 |
Covestro Makrolon® Rx2435 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• Medical devices• Low.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ISO 178 |
DuPont Performance Polymers Crastin® S650FR BK851 Polybutylene Terephthalate (PBT)
(Unverified Data**)< Unreinforced Flame Retardant Polybutylene Terephthalate Crastin S650FR is an unreinforced black flame retardant polybutylene terephthalate for injection molding.Information provided by DuPont Perfor.. |
|||
Flexural Strength | 100 - 128 MPa | 14500 - 18500 psi | |
Bulk Molding Compounds BMC T14 General Purpose Molding Compound BMC T14 is a general purpose molding compound. Due to the excellent flow and controlled reactivity, BMC T14 is well suited for injection, transfer or compression molding of intricate parts. Typica.. |
|||
Flexural Strength | 100 - 140 MPa | 14500 - 20300 psi | ISO 178 |
Bulk Molding Compounds tetra-DUR F 4401 Bulk Molding Compound UL-licensed, general purpose productTypical Applications - Requiring mechanical strength, abrasion resistance, dimensional stability, electrical insulation, electrostatic dissipation (explosion prot.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
Ravago Manufacturing Americas Hylon® N2200 HL Nylon 6/6
(discontinued **) Available in North America Additive: Heat Stabilizer and Lubricant Features: Lubricated and Heat StabilizedRoHS CompliantForm: Pellets Color: BlackProcessing Method: Injection MoldingInformation pr.. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
A. Schulman POLYFORT™ FXP 6630 Nylon 6.6 Polypropylene Alloy DescriptionPolyfort® FXP 6630 is a nylon 6.6 / polypropylene alloy with 30% wollastonite.Information provided by A. Schulman. |
|||
Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
Lucent Polymers POM-500 Acetal Homopolymer, General Purpose, Injection Grade Add "U" for UV StabilizedInformation provided by Lucent Polymers, Inc. |