Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 95.0 MPa | 13800 psi | |
Plastcom SLOVALEN PH 49 GF 30 TS PP, 30% glass fibre, mod. of mech. Properties FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 30% glass fibre, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP... |
|||
Flexural Strength | 95.0 MPa | 13800 psi | STN EN ISO 178 |
Plastcom SLOVAMID 6 T 15 Polyamide 6, 15% Micronized Talc FeaturesDecreased shrinkage against the BT types, increased heat application up to 170°C. Increased tensile modulus - strength of the material. PA matrix reduction. Application for tools, fillin.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | |
Poco Graphite SCF Semiconductor Grade Graphite Although it is impossible to identify differences between various grades of graphite by looking at them, each grade has a special set of characteristics and physical properties that determine their .. |
|||
Flexural Strength | <= 95.0 MPa | <= 13800 psi | ISO 178 |
Polykemi AB POLYblend 65FS LB PC/ABS-Blend Information provided by Polykemi AB |
|||
Flexural Strength | <= 95.0 MPa | <= 13800 psi | ISO 178 |
Polykemi AB POLYblend 65FS PC/ABS-Blend Information provided by Polykemi AB |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO 178 |
Nilit FRIANYL B63 SG-GV 2515 Nylon 6 for injection molding, 25% mineral filled and 15% glass fiber reinforced Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | <= 95.0 MPa | <= 13800 psi | ISO 178 |
Polykemi AB SCANMID 6 B11^ Nylon 6 Information provided by Polykemi AB |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO 178 |
Radici Radilon® S35HR (dry) Nylon 6 Medium high viscosityInformation provided by Radici group. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | |
Plastcom SLOVAMID 6 T 20 PA6, 20% mineral filling FeaturesDecreased shrinkage against the BT types, increased heat application up to 170°C. Increased modulus in tension - strength of the material. PA matrix reduction. Application eg. for tools, fi.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | 2 mm/min; ISO 178 |
Hexion Bakelite™ X24 Phenolic Formaldehyde Resin
(discontinued **) Phenolic molding compound, mainly organically filled.Application areas: Operating controls, housing parts, lamp holders.Information provided by Bak AGBak AG became a part of Hexion in 2005. |
|||
Flexural Strength | 95.0 MPa @Strain 3.00 % |
13800 psi @Strain 3.00 % |
2 mm/min; ISO 178-A |
Lanxess Pocan® DP 7102 000000 PBT, 32% Mineral PBT, 32% mineral, injection molding, LDSInformation provided by LANXESS. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | 1.5 mm/min; ISO 178:2001 |
Global EPP PA 612 Copolymer Cast Polyamide 612 Cast nylons are generally accepted as the primary engineering polymer, suitable for virtually any plain bearing application. By varying the conditions of polymerisation the mechanical properties of .. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | 2 mm/min; ISO 178-A |
Lanxess Pocan® DP 7318 000000 PBT, 17% Pigment PBT, 17% white pigments, injection molding, improved light reflection, low tendency to warpInformation provided by LANXESS. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP RAL22I PA 66 LNP* LUBRICOMP* RAL22I is a compound based on Nylon 66 resin containing 10% PTFE, 10% Aramid Fiber. Added features of this material include: Wear Resistant, High Impact. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics LNP LUBRICOMP RL002 PA 66 (Europe-Africa-Middle East) LNP* Verton* RL002 is a compound based on Nylon 66 resin containing PTFE. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO 178 |
SABIC Innovative Plastics LNP STAT-KON DD0009PC PC (Asia Pacific) LNP STAT-KON* DD0009PC is a compound based on Polycarbonate resin containing Carbon Powder, Flame Retardant. Added features of this material include: Electrically Conductive. |
|||
Flexural Strength | 95.1 MPa | 13800 psi | ASTM D790 |
Styron EMERGEâ„¢ 7550 Polycarbonate (PC) / Acrylonitrile Butadiene Styrene (ABS) EMERGEâ„¢ PC/ABS 7550 advanced resin is an ignition-resistant PC/ABS blend that contains no chlorine or bromine additives. This resin is suitable for use in a wide variety of applications in the.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ASTM D790 |
SABIC Innovative Plastics LNP STAT-KON RD000 PA 66 LNP STAT-KON* RD000 is a compound based on Nylon 66 resin containing Carbon Powder. Added feature of this material is: Electrically Conductive. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO 178 |
Polyplastics Duranex® 2002 Polybutylene Terephthalate (PBT), Standard DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Flexural Strength | 95.0 - 115 MPa | 13800 - 16700 psi | At Rupture; ISO 178 |
Vyncolit G885 Novolac Phenolic Glass fiber and mineral filled phenolic molding compound with excellent mechanical and thermal properties. Information provided by Vyncolit, a Sumitomo Bak Group |
|||
Flexural Strength | 95.1 MPa | 13800 psi | ASTM D790 |
A. Schulman SCHULAMID® 66 PTFE20 HS 20% PTFE Lubricated, Heat Stabilized Nylon 6/6 Information provided by A. Schulman. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ASTM-D790 |
Polyram RamTal PM1609 Acetal, Molybdenum Disulfide Filled Molybdenum disulfide filled polyacetal for injection molding applications.Information provided by Polyram Ram On Ind. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | 2 mm/min; ISO 178 |
Covestro Apec® 1603 High-Heat Polycarbonate This linear, amorphous copolycarbonate is most suitable for applications that must withstand high temperatures and exhibit toughness, impact resistance and high transparency. These properties, along.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO Data |
BASF Ultramid® 8202C HS BK-102 PA6 (Dry) Ultramid 8202C HS BK-102 is a heat stabilized, low viscosity, pigmented black, PA6, injection molding homopolymer possessing a modified crystalline structure for increased property performance and f.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO Data |
BASF Ultramid® 8202C HS PA6 (Dry) Ultramid 8202C HS is a heat stabilized, low viscosity, PA6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It is also.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO 178 |
Azdel Plus C220-B01 22% Chopped Fiber Mat / PP Resin Matrix AZDEL® C220-B01 is a glass mat thermoplastic laminate based upon a random oriented chopped fiber mat contained within a polypropylene resin matrix. This composite material features high flow prope.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | ISO 178 |
Ascend Performance Materials Vydyne® 22HSP Nylon 66, General Purpose, Heat Stabilized, DAM Availability:Asia PacificEuropeNorth America Additive:Lubricant Features: Fast Molding CycleGasoline ResistanceGeneral PurposeGood Abrasion ResistanceGood Chemical ResistanceGood Mold ReleaseGood To.. |
|||
Flexural Strength | 95.0 MPa | 13800 psi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics Lexan® ML3260 PC (Europe-Africa-Middle East) LEXAN ML3260 is a medium viscosity, 15% glass reinforced, flame retardant grade especially designed for applications like computer cartridges. |