Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Compressive Strength | 18.0 MPa | 2610 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica Omniamid PA 6 - Akulon 6 - Dry Semi-crystalline polymer of polyamide obtained by the polymerisation of the caprolactam. Its large popularity is due to both its good overall features as well as its cost-performance relationship. T.. |
|||
Compressive Strength | 18.0 MPa | 2610 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica PC Polycarbonate This amorphous polymer is commonly used for its high shock resistance even at low temperature. It is not a material recommended for mechanical applications, even if its dimensional stability does ma.. |
|||
Compressive Strength | 18.0 MPa | 2610 psi | |
Pyrotek B-3A REFRACTORY BOARD Pyrotek B-3A is a high density calcium silicate board specifically designed for demanding applications such as holding furnaces, launder linings and baffle plates. Its high density and superior har.. |
|||
Compressive Strength | 18.0 MPa @Strain 5.00 %, Temperature 300 °C |
2610 psi @Strain 5.00 %, Temperature 572 °F |
|
Pyrotek ISOMAG® 70 Structural Insulation Isomag® 70 is magnesia silicate based formulation provides insulating properties similar to calcium silicate with good strength and dimensional stability up to 1000°C. ApplicationsTorpedo cars La.. |
|||
Compressive Strength | 18.0 MPa | 2610 psi | 10% Yield Point; DIN 53454 |
Fluorseals PTFE Unfilled Information provided by TEKU GmbH Fluorkunststoffe, a distributor of Fluorseals materials. |
|||
Compressive Strength | 18.0 MPa | 2610 psi | EN 1094-5: 1995 |
Skamol Group Moler M-EXTRA 'E' Insulating Block SKAMOL Moler insulating bricks & blocks have the following characteristics: Max. service temperature: Up to 1000°C (1832°F)Back-up insulation Excellent insulating propertiesHigh mechanical str.. |