Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Compressive Strength | 110 MPa | 16000 psi | |
Poco Graphite SUPERSiC® Basic Silicon Carbide The SUPERSiC Material System allows customization of basic silicon carbide. Select from groups of infiltration materials, cleaning options, coating materials and thicknesses to optimize material for.. |
|||
Compressive Strength | 110 MPa | 16000 psi | 10% Def.; ASTM D695 |
Quadrant EPP Acetron® AF Blend POM-H Acetal Extruded PTFE-Filled Acetal Homopolymer (ASTM Product Data Sheet) |
|||
Compressive Strength | 110 MPa | 16000 psi | Break; TM R050-38 |
Resinlab® EP1320LV Heat Cure Epoxy Conformal Coating Resinlab™ EP1320 and EP1320LV are one part heat cure epoxy conformal coatings. They can also be used as a small mass potting compounds, structural adhesives, or insulating polymer systems where the.. |
|||
Compressive Strength | 110 MPa | 16000 psi | Break; TM R050-38 |
Resinlab® EP1330 Heat Cure Epoxy Polymer System Resinlab™ EP1330 and EP1330LV are one part heat cure epoxy polymer systems. They can also be used as a small mass potting or staking compounds, or a dam adhesive in and “dam and fill” application.. |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK)
(Unverified Data**) Ketaspire KT-820 SL30 is a polyetheretherketone (PEEK) compound designed to provide a balance of excellent mechanical properties, wear resistance and low coefficient of friction in both dry and exte.. |
|||
Compressive Strength | 110 MPa | 16000 psi | 10% Def.; ASTM D695 |
Quadrant EPP Duratron® PAI T4501 Polyamide-imide, compression molded bearing grade (ASTM Product Data Sheet) |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Quantum Nylon 6/6 MoS2 Filled Information provided by Quantum Advanced Engineering Plastics |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
IDI Composites 46-09 Thermoset Polyester, Molding Abrasion resistant, electrical grade material with V-O flame resistance and moderate strength.Data provided by the manufacturer. |
|||
Compressive Strength | 110 MPa | 16000 psi | Sample Type B, 5 mm/min; ISO 604:2002 |
Global EPP POM C Acetal Copolymer Polyacetals are highly crystalline thermoplastics, characterised by their high mechanical strength, rigidity and impact resistance. Acetal absorbs very little moisture, enabling the product to maint.. |
|||
Compressive Strength | 110.3 MPa | 16000 psi | Parallel to pressing direction |
Momentive Performance Materials HBN Hot-Pressed Boron Nitride Hot-pressed BN is compacted at temperatures up to 2000°C and pressures up to 2000 psi to form a dense, strong engineering material that is easily machined. It is available in standard and custom.. |
|||
Compressive Strength | 110.3 MPa | 16000 psi | |
Henkel Hysol EA 9377 Paste Adhesive System Moldable plastic shim, excellent microcracking resistance under thermal cycling. High compressive strength.Application: Liquid Shim |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Solvay Specialty Polymers AvaSpire® AV-630 Polyaryletherketone (PAEK) AvaSpire® AV-630 is an unreinforced polyaryletherketone (PAEK) developed as an alternative to low melt flow PEEK for the extrusion of ultra-thin films. Films with thicknesses as low as 0.2 mils (.. |
|||
Compressive Strength | 110 MPa | 16000 psi | 10% strain; ASTM D695 |
Saint-Gobain Meldin® 7022 Isostatically Molded Graphite Filled Polyimide Finished parts and basic shapes made from 40% by weight graphite filled polyimide material for applications requiring a low coefficient of thermal expansion, self lubricating properties, and good di.. |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Techmer ES Plaslube® J-50/20/SI/2 Polycarbonate, 20% GFR, 2% Silicone |
|||
Compressive Strength | 110 MPa | 16000 psi | |
Engineered Syntactic Systems HZ-40 Deep Water Syntactic Foam Syntactic foams are a unique combination of hollow spheres, a resin matrix, and other additives. When combined and processed properly, the constituents form a lightweight homogeneous material having.. |
|||
Compressive Strength | 110 MPa | 16000 psi | Absolute Drying; ASTM-D695 |
Toyobo GLAMIDE® T-400G15 Nylon-6 GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a.. |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Ensinger Tecapeek® XP-117 Compression Molded PEEK Compound, 25% PTFE Filled Ensinger Special Polymers offers over twenty different VICTREX® PEEK blends to choose from and has the capability to blend custom compounds for specific applications. Compression molding results in.. |
|||
Compressive Strength | 110 MPa | 16000 psi | |
3M iM16K Glass Bubbles 3M™ Glass Bubbles are engineered hollow glass microspheres that are alternatives to conventional fillers and additives such as silicas, calcium carbonate, talc, clay, etc., for many demanding appli.. |
|||
Compressive Strength | 110 - 138 MPa | 16000 - 20000 psi | |
Bulk Molding Compounds BMC T12-17394 General Purpose Molding Compound BMC T12-17394 is a general purpose molding compound. Due to the excellent flow and controlled reactivity, BMC T12 is well suited for injection, transfer or compression molding of intricate parts. .. |
|||
Compressive Strength | 110 - 138 MPa | 16000 - 20000 psi | |
Bulk Molding Compounds BMC T12(18) General Purpose Molding Compound BMC T12(18) is a general purpose molding compound. Due to the excellent flow and controlled reactivity, BMC T12 is well suited for injection, transfer or compression molding of intricate parts. Ty.. |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
PolyOne Edgetek® NI-20GF/000 Nylon 6/10, Glass Filled
(discontinued **) Description/Features:Glass Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Quantum Polycarbonate 20% Glass Fiber Filled Information provided by Quantum Advanced Engineering Plastics |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Technetics Group Amicon™ Acetal Homopolymer
(Unverified Data**) Information provided by Technetics Group (formerly Plastomer Technologies) |
|||
Compressive Strength | 110 - 130 MPa | 16000 - 18900 psi | ISO 604 |
Vyncolit 3520 CG Novolac Phenolic Graphite filled phenolic molding compound with excellent dimensional stability. Self-lubricating and has a low coefficient of friction. Not suitable for electrical applications.USES: Gas meter par.. |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Oxford Polymers 20GF 20% Glass Fiber Filled Polycarbonate for Injection Molding 20% Glass Fiber Filled Polycarbonate for Injection MoldingInformation provided by Oxford Polymers. |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Quantum Acetal-Homopolymer Information provided by Quantum Advanced Engineering Plastics |
|||
Compressive Strength | 110 MPa | 16000 psi | ASTM D695 |
Resinoid 7201 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Compressive Strength | 110 - 138 MPa | 16000 - 20000 psi | |
Bulk Molding Compounds BMC T15(GPT) General Purpose Molding Compound BMC T15(GPT) is a high strength, low shrink general purpose molding compound. Due to the excellent flow and controlled reactivity, BMC T15(GPT) is well suited for injection, transfer or compression.. |