Polymer Property : Tensile Strength = 13100 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength	90.0 MPa	13100 psi	ASTM D638
Premix Premi-Glas® 3404 33% Glass Reinforced SMC Description: Premi-Glas® 3404 is a glass reinforced thermoset sheet molding compound designed for mass transit and high strength flame retardant applications where low smoke and flame are required...
Tensile Strength	90.0 MPa	13100 psi	at Yield; ISO 527-1/-2
Quadrant EPP Ertalyte® PET, cast (ISO Data) The specific properties of this virgin crystalline PET make it especially suitable for the manufacture of mechanical precision parts which have to sustain high loads and/or are subject to wear.
Tensile Strength	90.0 MPa	13100 psi	at Yield; ISO 527-1/-2
Quadrant EPP Ketron® TX PEEK + solid lubricant, extruded (ISO Data) This member of the Ketron PEEK family has been developed especially for the food industry. Like Ketron PEEK-1000, this new internally lubricated material has a food contact compliant composition, bu..
Tensile Strength	90.0 MPa	13100 psi	ISO 527-2
NOVA Chemicals Dylark® 378P30 Glass Reinforced Engineering Resin Features: Ultra high modulus, High heat resistance, excellent adhesion to urethaneApplications: Instrument panel substrates, Brackets, Structural components
Tensile Strength	90.0 MPa @Thickness 4.00 mm, Temperature 23.0 °C	13100 psi @Thickness 0.157 in, Temperature 73.4 °F	5.0 mm/min; ISO 527
PolyOne Bergamid™ B70 G/GK30 TM-Y UV NC Polyamide 6 (Nylon 6) Information provided by PolyOne
Tensile Strength	90.0 MPa @Temperature 23.0 °C	13100 psi @Temperature 73.4 °F	DAM; ASTM D638
DuPont Performance Polymers Zytel® 8018HS BKB085 Nylon 66 (Unverified Data**) Zytel® 8018HS BKB085 is a 14% glass reinforced, toughened, heat stabilized black polyamide 66 resin.Information provided by DuPont Performance Polymers
Tensile Strength	90.0 MPa	13100 psi	ASTM D638
Solvay Specialty Polymers VeradelÂ® 3000RP Polyethersulfone (PESU) VeradelÂ® 3000RP hydroxyl-functionalized polyethersulfones (r-PESU) is an amorphous, high-temperature sulfone polymer featuring reactive end groups to enhance solubility for dissolving or dispersi..
Tensile Strength	90.0 MPa	13100 psi	ASTM D638
Solvay Specialty Polymers VeradelÂ® 3600RP Polyethersulfone (PESU) VeradelÂ® 3600RP hydroxyl-functionalized polyethersulfone (r-PESU) is an amorphous, high-temperature sulfone polymer featuring reactive end groups to enhance solubility for dissolving or dispersin..
Tensile Strength	90.2 MPa	13100 psi	ASTM D638
Shinkong Synthetic Fibers ShiniteÂ® E202G15 PBT, 15% Glass Filled Information from Shinkong Synthetic Fibers Corp.
Tensile Strength	90.2 MPa	13100 psi	ASTM D638
Shinkong Synthetic Fibers ShiniteÂ® E202G15 PBT, 15% Glass Filled Information from Shinkong Synthetic Fibers Corp.
Tensile Strength	90.0 MPa	13100 psi	ISO 527-1
Sax Polymers SAXLAC 108 GF17 Acrylonitrile Butadiene Styrene, 17% Glass Fiber Saxalac 108 GF17 is a 17% glass fiber reinforced ABS injection molding grade, characterized by high impact strength, high stiffness and good resistance to heat distortion.Mechanical property data te..
Tensile Strength	90.0 MPa	13100 psi	dry; ISO 527
Ter Hell Plastic Terez® PA 6 7751 TGF 15 GL Polyamide 6, 15% Glass Fiber Description: Medium viscosity, dry impact resistant PA 6, 15% glass fiber reinforced and improved surface gloss.Application: For molding parts with good stiffness and high dimensional stability.In..
Tensile Strength	90.0 MPa @Thickness >=1.50 mm	13100 psi @Thickness >=0.0591 in	24hr/23°C/50% RH; ISO 527; IEC/EN 60893-2 5.6
Elektro-Isola Etronax MMMF Phenolic, Cotton Fabric Reinforcement, Light Brown, Sheets Description: Friction reducing material consisting of phenolic resin and a very fine cotton fabric. Exclusively for mechanical applications. Good dry-run properties but can be lubricated with oil, g..
Tensile Strength	90.0 MPa @Thickness >=1.50 mm	13100 psi @Thickness >=0.0591 in	24hr/23°C/50% RH; ISO 527; IEC/EN 60893-2 5.6
Elektro-Isola Etronit IV C Phenolic, Paper Reinforcement, Yellow, Sheets Description: Grade for mechanical electrotechnical and high frequency purposes. Tropical grade, well suited for areas where high air humidity can be expected and lasting electrical properties despit..
Tensile Strength	90.0 MPa @Thickness >=1.50 mm	13100 psi @Thickness >=0.0591 in	24hr/23°C/50% RH; ISO 527; IEC/EN 60893-2 5.6
Elektro-Isola Etronit MBM Phenolic/melamine, Paper Reinforcement, Grey/also other Colors, Sheets Description: The surfaces consist of melamine, which ensures a scratch-resistant, tracking-resistant surface. The surfaces are grey as standard, but other colors can be selected from the color chart..
Tensile Strength	90.0 MPa	13100 psi	dry; DIN 53 455
Hippe PA 66 Nylon 66 The polyamide with high degree of hardness, stiffness, scuff strength and stability of shape under heat. Preferred polyamide for components subjected to high load and heat stress in electrical, mec..
Tensile Strength	>= 90.0 MPa	>= 13100 psi	IEC 1212-2 5.7
Hippe SI GC 202 Woven Glass Cloth Reinforced Silicone Resin - Sheet Used in mechanical and electrical applications at elevated temperature. Good heat resistance.Information provided by Hippe.
Tensile Strength	90.0 MPa @Thickness >=1.50 mm	13100 psi @Thickness >=0.0591 in	24hr/23°C/50% RH; ISO 527; IEC/EN 60893-2 5.6
Elektro-Isola Etronit 201 MBM Phenolic/melamine, Paper Reinforcement, Grey/also other Colors, Sheets Description: This material is not standardized, but the base material is the same as Etronit 201 M. The surfaces consist of melamine, which ensures a scratch-resistant, tracking-resistant surface. T..
Tensile Strength	90.0 MPa	13100 psi	dry; ISO 527
Azoty Tarnow™ Tarnamid® T-27 CFHI Polyamide 6 - Antistatic and Electroconductive Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Electroconductive grade based on carbon fiber reinforcement, very high stiffn..
Tensile Strength	90.0 MPa	13100 psi	ISO 527
Azoty Tarnow™ Tarnamid® T-27 M Polyamide 6 - Improved Slip Properties Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Low wear and low friction grade, contains molybdenum disulfide, PTFE.Tarnamid..
Tensile Strength	90.0 MPa	13100 psi	ISO 527
Azoty Tarnow™ Tarnamid® T-27 MW30 Polyamide 6 - Mineral Reinforced 30% Mineral filled, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High mechani..
Tensile Strength	90.0 - 110 MPa	13100 - 16000 psi	Injection; ISO 527
Raschig Group DECAL® 152CL Phenolic Glass-fiber and mineral reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and mechanical properties. This product meet..
Tensile Strength	90.0 MPa	13100 psi	ASTM D638
Solvay Specialty Polymers Veradel® 3000RP Polyethersulfone (PESU) (Unverified Data**) Veradel® 3000RP hydroxyl-functionalized polyethersulfones (r-PESU) is an amorphous, high-temperature sulfone polymer featuring reactive end groups to enhance solubility for dissolving or dispersing..
Tensile Strength	90.0 MPa	13100 psi	ASTM D638
Solvay Specialty Polymers Veradel® 3600RP Polyethersulfone (PESU) (Unverified Data**) Veradel® 3600RP hydroxyl-functionalized polyethersulfone (r-PESU) is an amorphous, high-temperature sulfone polymer featuring reactive end groups to enhance solubility for dissolving or dispersing ..