Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength | 7.76 MPa @Strain 100 % |
1130 psi @Strain 100 % |
Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R4510H Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength | 7.79 MPa | 1130 psi | Silicone Property; ASTM D412 |
Arlon MT920-10#3.3-P1 0.020" (0.508 mm) Cured Self-Fusing Silicone Tape (Triangular, Unsupported) with Poly Interleave Description:0.020” thick x 1.0” wide x 3.33 yards long, Rectangular cross-section, Silicone, Self-Fusing Tape.Design/Construction: Interleave: Polyethylene Rubber: Cured Self-Fusing Silicone Rubbe.. |
|||
Tensile Strength | 7.80 MPa | 1130 psi | |
Shin-Etsu Silicones LIMSâ„¢ KE1950-60A/B Elastomer KE-1950-60 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. It's viscosity is low enough to allow easy .. |
|||
Tensile Strength | 7.80 MPa | 1130 psi | |
Shin-Etsu Silicones LIMSâ„¢ KE1950-70A/B Elastomer KE-1950-70 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. It's viscosity is low enough to allow easy .. |
|||
Tensile Strength | 7.79 MPa | 1130 psi | Silicone Property; ASTM D412 |
Arlon 51073R031 0.0311" (0.79 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Cured Silicone Rubber This data represents typical values for the production materi.. |
|||
Tensile Strength | 7.79 MPa | 1130 psi | Silicone Property; ASTM D412 |
Arlon UltraPad™ 51073G031D Silicone-Based Press Pad Green UltraPad™ D65: Silicone Based Press PadDesign/Construction:Interleave: 3 mil PolyethyleneSide 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Cured Silicone RubberThis data.. |
|||
Tensile Strength | 7.79 MPa | 1130 psi | Silicone Property; ASTM D412 |
Arlon UltraPad™ 51073R031D Silicone-Based Press Pad UltraPad™ D65: Silicone Based Press PadDesign/Construction:Interleave: 3 mil PolyethyleneSide 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Cured Silicone RubberThis data repre.. |
|||
Tensile Strength | 7.79 MPa | 1130 psi | Silicone Property; ASTM D412 |
Arlon Ultrapad™ 55072R125D 0.125" (3.17 mm) Cured Silicone Rubber with Fiberglass Substrate Description: Ultrapad™ Silicone-based press pad. Arlon UltraPad press pad is a high performance, fiberglass reinforced, silicone sheet designed for flex and rigid-flex circuitry lamination. UltraPa.. |
|||
Tensile Strength | 7.79 MPa | 1130 psi | Silicone Property; ASTM D412 |
Arlon UltraPad™ 55073R031 Silicone-Based Press Pad UltraPad™ D65: Silicone Based Press PadDesign/Construction:Interleave: 3 mil PolyethyleneSide 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Cured Silicone RubberThis data repre.. |
|||
Tensile Strength | 7.79 MPa | 1130 psi | Silicone Property; ASTM D412 |
Arlon Ultrapad™ D 65 (55073R062) 0.0622 (1.58 mm) Cured Silicone Rubber with Fiberglass Substrate Description: Ultrapad™ D65 Silicone-based press pad. Arlon UltraPad press pad is a high performance, fiberglass reinforced, silicone sheet designed for flex and rigid-flex circuitry lamination. Ult.. |