Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 1.8 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 1.8 - 2.2 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 - 2.2 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1283/L
NIZHNEKAMSKNEFTEKHIM PE 4116P (16402) Linear Low Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Melt Flow 1.8 - 2.2 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 - 2.2 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1283/L
NIZHNEKAMSKNEFTEKHIM PE 4118N (18401) Linear Low Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Melt Flow 1.8 - 2.2 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 - 2.2 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1283/L
NIZHNEKAMSKNEFTEKHIM PE 5117P (18602) Linear Low Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Melt Flow 1.8 - 2.2 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 - 2.2 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1283/L
NIZHNEKAMSKNEFTEKHIM PE 5118P (18602) Linear Low Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Melt Flow 1.8 g/10 min

@Load 10.0 kg,
Temperature 220 °C
1.8 g/10 min

@Load 22.0 lb,
Temperature 428 °F
PTS Trilac® ABS-HH2500 Super High Heat ABS Resin
Information provided by Polymer Technology and Services, LLC (PTS).
Melt Flow 1.8 - 2.2 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 - 2.2 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1283/L
NIZHNEKAMSKNEFTEKHIM PE 4115P (16402) Linear Low Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Melt Flow 1.8 - 2.2 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 - 2.2 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1283/L
NIZHNEKAMSKNEFTEKHIM PE 4117P (18402) Linear Low Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Melt Flow 1.8 - 2.2 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 - 2.2 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1283/L
NIZHNEKAMSKNEFTEKHIM PE 4118P (18402) Linear Low Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Kingfa HC-110 Modified ABS
Features:UL94 HB @ 1.6-3.0mmElectro-platingApplications:Electro-plating partsInformation Provided by Kingfa Sci. & Tech. Co., Ltd.
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Kingfa HR-527 Modified ABS
Features:UL94 HB @ 1.5-3.2mmImpact resistanceApplications:Automobile partsAutomobile audioDashboard, interior trimAutomobile lamp, mirrorInformation Provided by Kingfa Sci. & Tech. Co., Ltd.
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 230 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 446 °F
Imerys ImerPlastâ„¢ 10WPC Recycled Polyolefin Resin
ImerPlast 10WPC is a black, UV stabilized, recycled resin with no significant odor, for compounding with wood flour for extruded decking applications. Melt filtered to 250 µm to ensure no particu..
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 190 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 374 °F
ISO 1133
Iran Petrochemical (PCC) EX 1 HF 7740F High Density Polyethylene
EX1 is a high density polyethylene with 1-Butene as co monomer. It has acceptable tear strength, medium molar mass and narrow molar mass distribution.Applications: stretched film and tapes for prod..
Melt Flow 1.8 g/10 min

@Load 21.6 kg,
Temperature 190 °C
1.8 g/10 min

@Load 47.6 lb,
Temperature 374 °F
ASTM D1238
IRPC Polimaxx Polene GA2850 High Density Polyethylene
CHARACTERISTICS: HIGH MOLECULAR WEIGH FOR BLOW MOLDING GRADE, RIGID, STACKABLE AND HIGHLY SHOCK RESISTANT CONTAINERS, EXCELLENT IMPACT STRENGTH APPLICATIONS: BLOW MOLDING FOR L-RING DRUMS (200 LITRE..
Melt Flow 1.8 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133/ASTM D1238
Silon Taborex TA 1131 HD Chemically-Crosslinkable HDPE Compound
TABOREX TA 1131 HD is a crosslinkable compound made by Silane grafted ethylene polymer. This graft polymer constitutes together with a Masterbatch containing the crosslinking catalyst a “SIOPLA..
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 190 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 374 °F
ISO 1133
Unipetrol PE HD LITEN® BB 38 HDPE
Made for blow molding, extrusion, and pipe applications.Information provided by Unipetrol RPA
Melt Flow 1.8 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Unipetrol PE HD LITEN® TB 38 HDPE
Made for tape applications.Information provided by Unipetrol RPA
Melt Flow 1.8 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Topas Advanced Polymers TOPAS® 8007F-04 Cyclic Olefin Copolymer (COC)
TOPAS® 8007F-04 is a general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and..
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 190 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 374 °F
ISO 1133
Borealis Borstar® BB2581 HDPE for Blow Molding
Borstar BB2581 is a high-density polyethylene intended for blow molding of products with high stiffness and very good environmental stress crack resistance (ESCR).Borstar BB2581 is recommended for h..
Melt Flow 1.8 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Topas Advanced Polymers TOPAS® 8007F-400 Cyclic Olefin Copolymer (COC)
TOPAS® 8007F-400 is a robust film extrusion grade designed for blending with polyethylene (PE). It is a moderate clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, ..
Melt Flow 1.8 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 g/10 min

@Load 4.76 lb,
Temperature 374 °F
cm³/10min; ISO 1133
DuPont Performance Polymers Delrin® 100P BK602 Acetal (POM)  (Unverified Data**)
High Viscosity Acetal Homopolymer with Improved ProcessingDelrin 100P is a high viscosity acetal homopolymer for use in easy to fill molds. Delrin 100P provides maximum toughness in the product line..
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Chi Mei Polylac® PA-717C ABS
Medium impact
Melt Flow 1.8 g/10 min

@Load 3.80 kg,
Temperature 230 °C
1.8 g/10 min

@Load 8.38 lb,
Temperature 446 °F
Procedure A Condition I; ASTM D1238
Diamond Polymers ABS 1501E
Description: Extrusion GradeInformation provided by Diamond Polymers, Inc.
Melt Flow 1.8 g/10 min

@Load 3.80 kg,
Temperature 230 °C
1.8 g/10 min

@Load 8.38 lb,
Temperature 446 °F
ASTM D1238
Diamond Polymers ABS 3500 EF-Low Gel Extrusion Grade, Low Gel
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Melt Flow 1.8 g/10 min

@Load 3.80 kg,
Temperature 230 °C
1.8 g/10 min

@Load 8.38 lb,
Temperature 446 °F
Procedure A Condition I; ASTM D1238
Diamond Polymers ABS 9500B
Description: Blow Molding Grade, Ultra High ImpactInformation provided by Diamond Polymers, Inc.
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Diamond Polymers ASA S124 ASA Weatherable Polymers Injection Molding Grade, Medium Modulus
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
Procedure A Condition G; ASTM D1238
Diamond Polymers ASA S210
Description: ASA Weatherable Polymer, Injection Molding Grade, Medium ModulusInformation provided by Diamond Polymers, Inc.
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
Procedure A Condition G; ASTM D1238
Diamond Polymers ASA S210B
Description: ASA Weatherable Polymer, Injection Molding Grade, Medium ModulusInformation provided by Diamond Polymers, Inc.
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Chi Mei Polylac® PA-727 ABS
Electro-plating
Melt Flow 1.8 g/10 min

@Load 5.00 kg,
Temperature 200 °C
1.8 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Chi Mei Polylac® PA-757 ABS
High gloss, medium impact
Melt Flow 1.8 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.8 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
EVALCA EVAL® LC-T101 Ethylene Vinyl Alcohol Copolymer Resin  (discontinued **)
32 mol % Ethylene.Data provided by EVALCA. Applications: Solid phase pressure forming. EVOH is used in packaging applications because of its outstanding gas barrier properties.EVAL™ is now produc..
Copyright © lookpolymers.com All Rights Reserved