Physical Properties | Metric | English | Comments |
---|---|---|---|
Thickness | 63.5 microns | 2.50 mil | Polyethylene, Interleave |
Arlon 920-410C##FR-P1 0.020" (0.508 mm) Cured Self-fusing Silicone Tape
(discontinued **) Design/Construction: Interleave: Polyethylene Rubber: Cured Self-fusing Silicone Rubber Cross Section Type: 1” Wide Rectangular 1 inch wide, 20 mil thick, Brown, Rectangular cross-section, Self-fu.. |
|||
Thickness | 63.5 microns | 2.50 mil | ASTM D3652 |
3M 25A10 Co-Extruded Polyethylene Protective Tapes 3M™ Co-Extruded Polyethylene Protective Tape has a low-tack adhesive system to help provide temporary protection of many polished steel and aluminum sheets, coils, gloss finish plastic laminate top.. |
|||
Thickness | 63.5 microns | 2.50 mil | ASTM D3652 |
3M 25A12 Co-Extruded Polyethylene Protective Tapes 3M™ Co-Extruded Polyethylene Protective Tape has a low-tack adhesive system to help provide temporary protection of many polished steel and aluminum sheets, coils, gloss finish plastic laminate top.. |
|||
Thickness | >= 63.5 microns | >= 2.50 mil | Side 1 |
Arlon 28601W015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone Rubber Product Use: Flexible Heater InsulationAppearance: White silicone gum on fiberglass with polymer release linersThis.. |
|||
Thickness | 63.5 microns | 2.50 mil | Liner |
3M 7142 Repositionable Paper Label Material 3M™ Repositionable Paper Label Material 7113 and 7142 with 3M™ Adhesive 1000 offer unique, one-piece removability from many surfaces, including fragile papers, and can be repositioned repeatedly f.. |
|||
Thickness | >= 63.5 microns | >= 2.50 mil | Side 1 |
Arlon 49581B010 0.0105" (0.267 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place .. |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon 55579R031H 0.0315" (0.800 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: LDPELayer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: Style 162 FiberglassThis data represents typical values for the production material. T.. |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon 55946C030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: PolyethyleneSide 2: Uncured Silicone Rubber Substrate: 162 Style Fiberglass Side 1: Cured Silicone Rubber This data represents typical values for the production mate.. |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon 56810R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1: Uncured Silicone Rubber Substrate: 1564 Style Fiberglass This data represents typical values for the production material. The data should not be.. |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon LW401C##FR-P1 0.040" (1.02 mm) Self-Fusing Silicone Tape (Triangular, Unsupported) Description: 1 inch wide, 40 mil thick, Brown, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indicates roll length.. |
|||
Thickness | 63.5 microns | 2.50 mil | Side 1; Arlon SQA-TMS-003 |
Arlon R38026B017 0.017" (0.432 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 1165 FiberglassSide 2: Uncured Silicone Rubber Interleave: LDPEThis data represents typical values for the production material. The.. |
|||
Thickness | 63.5 microns | 2.50 mil | Side 1; Arlon SQA-TMS-003 |
Arlon Thermabond® 48781A008 0.008" (0.203 mm) Uncured Silicone Rubber with Fiberglass Substrate Description: Generation II Thermabond® NP electrically insulating electronic adhesive. Bonds without primer.Design/Construction: Liner 1: PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style.. |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon Ultrapad™ 55072R125D 0.125" (3.17 mm) Cured Silicone Rubber with Fiberglass Substrate Description: Ultrapad™ Silicone-based press pad. Arlon UltraPad press pad is a high performance, fiberglass reinforced, silicone sheet designed for flex and rigid-flex circuitry lamination. UltraPa.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7125-25 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7725-10 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7725-11 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7725-25 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7725-56 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass.. |
|||
Thickness | >= 63.5 microns | >= 2.50 mil | Side 1 |
Arlon 44571R010A 0.010" (0.254 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone Rubber Side 2: Uncured Silicone Rubber This data represents typical values for the production material. The data should not be used to write, or in place.. |
|||
Thickness | 63.5 microns | 2.50 mil | Side 1 |
Arlon 51946C015A 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of.. |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon 55103R030 0.030" (0.762 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1: Cured Silicone RubberSubstrate: Style 162 FiberglassSide 2: Cured Silicone Rubber This data represents typical values for the production materia.. |
|||
Thickness | 63.5 microns | 2.50 mil | Total; ASTM D3752 |
3M 8421 Polyester Tape 3M™ Polyester Tape 8421 is for photographic industry for splicing most film for processing through the developing chemicals.Information provided by 3M |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon R38726R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 2: Uncured Silicone RubberSubstrate: Style 162 FiberglassSide 1: Cured SiliconeThis data represents typical values for the production material. The.. |
|||
Thickness | 63.5 microns | 2.50 mil | Facestock |
3M FS532 White Polystyrene Label Products 3M™ White Polystyrene Label Products FS501, FS502 and FS532 are hard, rigid film materials that offer economic alternatives for indoor applications. These polystyrene labels utilize 3M™ Adhesive R.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7125-139 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7125-14 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; The blue paper liner on 7125-10 and 7125-20 provides easier visibility when weeding, other film color.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7725-196 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7725-23 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass.. |
|||
Thickness | 63.5 - 88.9 microns | 2.50 - 3.50 mil | with adhesive |
3M Scotchcal™ ElectroCut™ 7725-99 Graphic Film 2-mil cast vinyl in 61 colors; Pressure-sensitive, permanent adhesive; Same color on both sides; Transparent synthetic liner resists moisture absorption and static build up; Lays flat for easier ass.. |
|||
Thickness | 63.5 microns | 2.50 mil | Interleave |
Arlon 55276R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 2: Uncured Silicone Rubber Substrate: Style 162 FiberglassSide 1: Cured Silicone RubberProduct Use: Flexible heater insulationAppearance: Red silic.. |