Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 90 g/10 min @Pressure 0.655 MPa |
90 g/10 min @Pressure 95.0 psi |
Severs Efflux; Geon® ALTC 23 (with provided formulation); Internal Method |
PolyOne Geon™ 180 Series 186A Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® 186A is low molecular weight homopolymer resin, providing a good balance of fused film physical properties and fusion characteristics. It provides excellent chemical foam characteristics with.. |
|||
Melt Flow | 90 g/10 min @Load 5.00 kg, Temperature 316 °C |
90 g/10 min @Load 11.0 lb, Temperature 600 °F |
ASTM D1283 |
Chevron Phillips Ryton® PR39 Polyphenylene Sulfide Resin
(discontinued **) Characteristics: Excellent thermal stabilityExcellent chemical resistanceApplications: CoatingsCompoundsExtrusionInformation provided by Chevron Phillips.Solvay Specialty Polymers has acquired the R.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 320 °C |
90 g/10 min @Load 4.76 lb, Temperature 608 °F |
ASTM D1238 |
Kuraray Genestarâ„¢ GW1458HF Nylon, 45% Glass Filled Low Warpage, High Flow HB grade. Halogen free, following the standards that Br is less than 900ppm, Cl is less than 900ppm, and total of halogen amount (Br and Cl) is less than 1500ppm. |
|||
Melt Flow | 90 - 145 g/10 min @Load 2.16 kg, Temperature 170 °C |
90 - 145 g/10 min @Load 4.76 lb, Temperature 338 °F |
DIN 53.735 |
Lubrizol Advanced Materials PEARLBOND® 102 Linear Thermoplastic Polyurethane PEARLBOND® 102 is a linear, polycaprolactone-based polyurethane, supplied in form of small white pellets, which combines a very high crystallization rate with a very high thermoplasticity level.A.. |
|||
Melt Flow | 90 - 145 g/10 min @Load 2.16 kg, Temperature 170 °C |
90 - 145 g/10 min @Load 4.76 lb, Temperature 338 °F |
ISO 1133 |
Lubrizol Advanced Materials PEARLBOND® 502 Linear Thermoplastic Polyurethane PEARLBOND™ 502 is a linear, polycaprolactone-copolyester polyurethane with a high crystallization rate and a very high thermoplasticity level.Application: Pearlbond™ 502 can be added to fo.. |
|||
Melt Flow | 90 g/10 min @Load 5.00 kg, Temperature 260 °C |
90 g/10 min @Load 11.0 lb, Temperature 500 °F |
Calculated from MVR using melt density; ISO 1133 |
Lanxess Durethan® BC 30 000000 Nylon 6 PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified |
|||
Melt Flow | 90 g/10 min @Load 5.00 kg, Temperature 266 °C |
90 g/10 min @Load 11.0 lb, Temperature 511 °F |
ASTM D1238 |
SABIC Innovative Plastics Valox® DR48 PBT (Europe-Africa-Middle East) VALOX DR48 is a 17% glass reinforced, flame retardant injection moulding PBT resin. Applications: lamp sockets, connectors, switches, electrical housings and bases, bobbins, trimmers and electromoto.. |
|||
Melt Flow | 90 g/10 min | 90 g/10 min | JIS K7210 |
Stellarchem MP-8001 TPE Compound This grade of Stellarchem TPE is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, complete.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 230 °C |
90 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Borealis BJ100HP Polypropylene Copolymer BJ100HP is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection molding process as well as in combination wi.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 230 °C |
90 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
A. Schulman PP 3475-01 Polypropylene High Melt Homopolymer Polypropylene DescriptionPolypropylene PP 3475-01 Natural is a high melt homopolymer polypropylene with consistent general purpose homopolymer characteristics. Information provided by A. Schulman. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 230 °C |
90 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
A. Schulman PP 3475-01 Polypropylene High Melt Homopolymer Polypropylene DescriptionPolypropylene PP 3475-01 Natural is a high melt homopolymer polypropylene with consistent general purpose homopolymer characteristics. Information provided by A. Schulman. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 230 °C |
90 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
A. Schulman PP 3475-01 Polypropylene High Melt Homopolymer Polypropylene DescriptionPolypropylene PP 3475-01 Natural is a high melt homopolymer polypropylene with consistent general purpose homopolymer characteristics. Information provided by A. Schulman. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 230 °C |
90 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
A. Schulman PP 3475-01 Polypropylene High Melt Homopolymer Polypropylene DescriptionPolypropylene PP 3475-01 Natural is a high melt homopolymer polypropylene with consistent general purpose homopolymer characteristics. Information provided by A. Schulman. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 230 °C |
90 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
A. Schulman PP 3475-01 Polypropylene High Melt Homopolymer Polypropylene DescriptionPolypropylene PP 3475-01 Natural is a high melt homopolymer polypropylene with consistent general purpose homopolymer characteristics. Information provided by A. Schulman. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 230 °C |
90 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
A. Schulman PP 3475-01 Polypropylene High Melt Homopolymer Polypropylene DescriptionPolypropylene PP 3475-01 Natural is a high melt homopolymer polypropylene with consistent general purpose homopolymer characteristics. Information provided by A. Schulman. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 190 °C |
90 g/10 min @Load 4.76 lb, Temperature 374 °F |
cm<sup>3</sup>/10 min; ISO 1133 |
EMS-Griltech Griltex® D 1309E Copolyester Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 190 °C |
90 g/10 min @Load 4.76 lb, Temperature 374 °F |
cm<sup>3</sup>/10 min; ISO 1133 |
EMS-Griltech Griltex® D 1309E Copolyester Hotmelt Adhesive (Technical Applications) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 160 °C |
90 g/10 min @Load 4.76 lb, Temperature 320 °F |
cm<sup>3</sup>/10 min; ISO 1133 |
EMS-Griltech Griltex® D 1516A Heat Stabilized Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 160 °C |
90 g/10 min @Load 4.76 lb, Temperature 320 °F |
cm<sup>3</sup>/10 min; ISO 1133 |
EMS-Griltech Griltex® D 1666A Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg |
90 g/10 min @Load 4.76 lb |
Melt flow ratio I10/I2 is 8.5. |
Dow DOWLEX™ IP-90 High Density Polyethylene Next Generation DOWLEX® IP-90 resin is a high flow improved processing high density polyethylene resin designed for ultra-thin wall injection molded containers and drink cups. This resin has been m.. |
|||
Melt Flow | 90 g/10 min @Load 5.00 kg, Temperature 275 °C |
90 g/10 min @Load 11.0 lb, Temperature 527 °F |
ISO 1133 |
Azoty Tarnow™ Tarnamid® T-27 MCS I8 Polyamide 6 - Impact Modified Increased impact resistance grade. Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main propert.. |
|||
Melt Flow | 90 g/10 min @Load 10.0 kg, Temperature 360 °C |
90 g/10 min @Load 22.0 lb, Temperature 680 °F |
ISO 1133 |
BASF Ultrason S 2010 PSU Ultrason S 2010 is an unreinforced, medium viscosity standard injection molding PSU grade. It flows readily and offers outstanding heat resistance and dimensional stability. It conforms to FDA req.. |
|||
Melt Flow | 90 g/10 min @Load 2.16 kg, Temperature 190 °C |
90 g/10 min @Load 4.76 lb, Temperature 374 °F |
"E"; ASTM D1238 |
Aaron Industries AAROPRENE® ATPR 1000 50A Elastomeric Compound AAROPRENE® ATPR 1000 Series Elastomeric CompoundDurometer values may be specified. Color may be specified. |