Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 1.0 - 8.0 g/10 min @Load 11.6 kg, Temperature 250 °C |
1.0 - 8.0 g/10 min @Load 25.6 lb, Temperature 482 °F |
ASTM D1238 |
Polymer Resources PPX-FRG30 Modified-PPO, V-1 Flame Retardant, 30% Glass Reinforced Modified-Polyphenylene Oxide, V-1 Flame Retardant, 30% Glass ReinforcedFeatures: • Bromine Free • Chlorine FreeProcess: Injection MoldingNotes: All physical, mechanical and thermal testing condu.. |
|||
Melt Flow | 1.0 - 8.0 g/10 min @Load 11.6 kg, Temperature 250 °C |
1.0 - 8.0 g/10 min @Load 25.6 lb, Temperature 482 °F |
ASTM D1238 |
Polymer Resources PPX-G15 Modified-PPO, 15% Glass Reinforced, High Flow Modified-Polyphenylene Oxide, 10% Glass Reinforced, High FlowProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Inf.. |
|||
Melt Flow | 1.0 - 8.0 g/10 min @Load 11.6 kg, Temperature 250 °C |
1.0 - 8.0 g/10 min @Load 25.6 lb, Temperature 482 °F |
ASTM D1238 |
Polymer Resources PPX-G30 Modified-PPO, 30% Glass Reinforced Modified-Polyphenylene Oxide, 30% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information pr.. |
|||
Melt Flow | 5.0 - 8.0 g/10 min | 5.0 - 8.0 g/10 min | on the basis of basic grades 11503-070 and 16803-070 |
Kazanorgsintez P2KP Polyethylene Pigment Masterbatches Production Method: P2KP polyethylene pigment masterbatches are produced on the basis of low density polyethylene with high content of masterbatches. Application: P2KP polyethylene pigment masterbatc.. |
|||
Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238-00 |
Ipiranga Petrochem PCC 0710 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238-00 |
Ipiranga Petrochem PCC 0742 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Melt Flow | 6.0 - 8.0 g/10 min | 6.0 - 8.0 g/10 min | ASTM D1238 |
Micropol L7 Low density polyethylene rotational molding powder Has a high gloss finish, and outstanding toughness. Information provided by Micropol Limited |
|||
Melt Flow | 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 230 °C |
4.0 - 8.0 g/10 min @Load 11.0 lb, Temperature 446 °F |
ASTM D1238 |
Kureha KF Polymer 2950 PVDF Copolymer KF Polymer is a fire-resistant engineering plastic which maintains the excellent performance of a fluoropolymer. It shows well-balanced molding processability similar to general-purpose resins. KF p.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 372 °C |
4.0 - 8.0 g/10 min @Load 11.0 lb, Temperature 702 °F |
ASTM D1238 |
Solvay Specialty Polymers Hyflon® MFA® F1530 Perfluoropolymer Hyflon® MFA is a family of perfluoro polymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, high flexural endurance, inherent flame resistanc.. |
|||
Melt Flow | 4.1 - 8.0 g/10 min | 4.1 - 8.0 g/10 min | A |
Shandong Dongyue Shenzhou New Material Co DS600 Perfluorinated Ethylene-Propylene Copolymer Conformable with: Q/DYS 003-2007Fluorinated Ethylene Propylene resin is the copolymer of the TFE and HFP, with good thermal stability, outstanding chemical inertness, good electrical insulation, and.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 230 °C |
4.0 - 8.0 g/10 min @Load 11.0 lb, Temperature 446 °F |
ASTM D1238 |
Solvay Specialty Polymers Solef® 11010 Polyvinylidene Fluoride (PVDF) Solef® 11010 PVDF is a medium-viscosity flexible PVDF copolymer resin and is typically processed by extrusion.Features: Copolymer; Good Flexibility; Medium ViscosityAdditional Properties: Crystal.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | multiple ranges available; ASTM D1238 |
Shuman SP810 Black Polystyrene High Impact Good impact strength, easy processability, good surface appearance, ULInformation provided by Shuman Plastics, Inc. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | multiple ranges available; ASTM D1238 |
Shuman SP880 Grey Polystyrene High Impact Good impact strength, easy processability, good surface appearance, ULInformation provided by Shuman Plastics, Inc. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
A. Schulman POLYFLAM™ RCP 500 C DescriptionPolyflam® RCP 500C is an economical flame-retardant concentrate based in low-density polyethylene that features excellent dispersion and processing stability up to 550°F. ApplicationRC.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | 230/2.16; May be specified; ASTM D1238 |
Plastics Group Polifil® GFRMPPCC-40 40% Glass Reinforced Polypropylene, High Impact Polifil® GFRMPPCC series compounds are high impact polypropylenes reinforced with chemically coupled glass fibers. This combination provides higher impact strength while retaining high stiffness.Ap.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
A. Schulman POLYFLAM™ RCP 500 C DescriptionPolyflam® RCP 500C is an economical flame-retardant concentrate based in low-density polyethylene that features excellent dispersion and processing stability up to 550°F. ApplicationRC.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
A. Schulman POLYFLAM™ RCP 500 C DescriptionPolyflam® RCP 500C is an economical flame-retardant concentrate based in low-density polyethylene that features excellent dispersion and processing stability up to 550°F. ApplicationRC.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
A. Schulman POLYFLAM™ RCP 500 C DescriptionPolyflam® RCP 500C is an economical flame-retardant concentrate based in low-density polyethylene that features excellent dispersion and processing stability up to 550°F. ApplicationRC.. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
A. Schulman POLYFLAM™ RCP 505C Flame Retardant Concentrate Based In Low-Density Polyethylene Information provided by A. Schulman. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
A. Schulman POLYFLAM™ RCP 505C Flame Retardant Concentrate Based In Low-Density Polyethylene Information provided by A. Schulman. |
|||
Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | ASTM D1238 |
A. Schulman POLYFLAM™ RCP 770C/CW DescriptionPolyflam® RCP 770C/CW is a flame-retardant concentrate based in low-density polyethylene that features excellent dispersion and processing stability up to 550°F.ApplicationRCP 770 C/CW.. |
|||
Melt Flow | 6.0 - 8.0 g/10 min @Temperature 230 °C |
6.0 - 8.0 g/10 min @Temperature 446 °F |
ASTM D1238 |
A. Schulman POLYFORT™ 1602 UV-3120 UV Stabilized, Glass Reinforced Copolymer Polypropylene DescriptionPolyfort® FPP 1602 UV-3120 is a black UV stabilized 10% chemically coupled glass reinforced copolymer polypropylene.Information provided by A. Schulman. |
|||
Melt Flow | 3.0 - 8.0 g/10 min | 3.0 - 8.0 g/10 min | |
Daikin NEOFLON RP-4040 EFEP Pellets NEOFLON EFEP is an ETFE based fluoropolymer combining the excellent physical properties derived from ETFE together with a low processing temperature that is more compatible with conventional thermop.. |
|||
Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Arkema Group Orevac® 9318 Film EVA-MAH Terpolymer EVA Terpolymers based Main Applications: Extrusion coating Thermo-adhesive filmsInformation provided by Arkema Group |
|||
Melt Flow | 6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
|
Breplast Bretene SPF M Thermoplastic Composite, 70% PP + 30% PE Recovered polypropylene and polyethylene compositeInformation provided by Breplast S.p.A. |
|||
Melt Flow | 3.0 - 8.0 g/10 min @Load 21.6 kg, Temperature 232 °C |
3.0 - 8.0 g/10 min @Load 47.6 lb, Temperature 450 °F |
ASTM D1238 |
Arkema Group KYNAR® LBG2 Polyvinylidene Fluoride Powder Characteristics: White, non-hygroscopic powder.Applications: Membrane, Lithium ion battery applicationsInformation provided by Arkema Inc. |
|||
Melt Flow | 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 372 °C |
4.0 - 8.0 g/10 min @Load 11.0 lb, Temperature 702 °F |
|
Daikin NEOFLON EP-541 ETFE Pellets Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl.. |
|||
Melt Flow | 3.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Solvay Specialty Polymers Solef® 31508 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Information provided by Solvay Specialty Polymers. |
|||
Melt Flow | 4.0 - 8.0 g/10 min @Load 12.5 kg, Temperature 230 °C |
4.0 - 8.0 g/10 min @Load 27.6 lb, Temperature 446 °F |
ISO 1133 |
Shanghai Ofluorine 9201 PVDF Pellets for cables Description: Excellent mechanical properties, heat resistance and flame resistance, PVDF for cable can bear high temperature, corrosive chemicals etc harsh working environment, which has low smoke, .. |