Polymer Property : Melt Flow = 30 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Melt Flow	30 g/10 min @Load 2.16 kg, Temperature 230 °C	30 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
RheTech Products P252-00 Polypropylene Copolymer, Natural Applications: Interior trimUnderhood componentsElectrical housingsInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow	30 g/10 min	30 g/10 min	Condition L 230/2.16; ASTM D1238
Pinnacle Polymers 1630 Polypropylene Homopolymer, Fine Fiber and Film Grade This Pinnacle Polymers Polypropylene is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties an..
Melt Flow	30 g/10 min @Load 5.00 kg, Temperature 200 °C	30 g/10 min @Load 11.0 lb, Temperature 392 °F	ASTM D1238
PolyOne Dynaflex™ G7930-1 NSFG Thermoplastic Elastomer (TPE) Dynaflex™ G7930-1 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. - NSF 51 approved - FDA (see Notes) - Overmold Adhesion to Polypropylene - Soft To..
Melt Flow	30 g/10 min	30 g/10 min	ASTM D1238
Gichem GILAC H120X6/VOU ABS Flame Retardant (discontinued **) ABS self-extinguishing class V0 with better fluidity and UV resistance. Medium injection speed.Information provided by GICHEM Gruppo Industriale Chimico
Melt Flow	30 g/10 min	30 g/10 min	ASTM D1238
Hyosung Topilene HJ746 PP HJ746 Impact CopolymerApplications:CompoundingElectric applianceAutomobile partsCharacteristics:High stiffnessHeat resistanceMedium impactInformation provided by Hyosung Corporation
Melt Flow	30 g/10 min	30 g/10 min	ASTM D1238
Hyosung Topilene R801 PP R801 Injection Random CopolymerApplications:High transparent productLarge articlesCharacteristics:High transparencyStiffnessInformation provided by Hyosung Corporation
Melt Flow	30 g/10 min @Load 2.16 kg, Temperature 230 Â°C	30 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238
LG Chemical KEYFLEX BT 5035D Ester Type TPE Description: Injection Molding, TPC-ET, Specialty, Low Modulus, Black ColorApplication: Automotive Body Plug, FastenerCAS: 37282-12-5 and 1333-86-4Information provided by LG Chemical
Melt Flow	30 g/10 min @Load 2.16 kg, Temperature 230 Â°C	30 g/10 min @Load 4.76 lb, Temperature 446 Â°F	L; ASTM D1238
Global PP-2340-S Polypropylene Block Copolymer Description-opacity, medium to high stiffness, high impact strength at low temperatureApplications-electrical appliances, bases, panels, auto parts, cupsInformation provided by Global Polymers Corpo..
Melt Flow	30 g/10 min @Load 1.20 kg, Temperature 300 Â°C	30 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238
Kotec Carbotex K-20UVR30 Polycarbonate, General Purpose, UV Stability + Mold Release Grade Features: UV stability, Mold release Super high flow, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting covers, Safety products, E & E parts, Household ap..
Melt Flow	30 g/10 min @Load 1.20 kg, Temperature 300 Â°C	30 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238
LG Chemical LUPOY GN1006FT PC, Halogen Free, Flame Retardant Description: Injection Molding, PC, Halogen Free Flame Retardant, Good FlowApplication: IT/OA, Electric & Electronic Housing and ComponentsCAS: 103598-77-2Information provided by LG Chemical
Melt Flow	30 g/10 min @Load 1.20 kg, Temperature 300 Â°C	30 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238
LG Chemical LUPOY SC5004T PC/Polyester, Transparency Description: Injection Molding, PC/Polyester, General Purpose, Transparency, High FlowApplication: Keypad for Mobile PhoneCAS: 103598-77-2Information provided by LG Chemical
Melt Flow	30 g/10 min @Load 2.16 kg, Temperature 230 Â°C	30 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ISO 1133
Gromax 1163LL TPE 163LL is medium modulus grade with nominal Durometer hardness of 63D. It contains color stable antioxidants. It can be processed by thermoplastic processing techniques like injection molding and ext..
Melt Flow	30 g/10 min @Load 5.00 kg, Temperature 260 Â°C	30 g/10 min @Load 11.0 lb, Temperature 500 Â°F	ISO 1133-1
Lanxess PocanÂ® ECO T 3230 000000 PBT + PET, 30% Glass Fiber PBT + PET, 30% glass fibers, injection molding, improved surface finish, contains 30% post-consumer recycled material, increased temperature peak loadInformation provided by LANXESS.
Melt Flow	30 g/10 min @Load 2.16 kg, Temperature 230 Â°C	30 g/10 min @Load 4.76 lb, Temperature 446 Â°F	L; ASTM D1238
Global PP-2311-SC Polypropylene Block Copolymer Description-opacity, medium to high stiffness, high impact strength at low temperatureApplications-electronic appliances, wall panelsInformation provided by Global Polymers Corporation.
Melt Flow	30 g/10 min @Load 5.00 kg, Temperature 260 °C	30 g/10 min @Load 11.0 lb, Temperature 500 °F	ISO 1133
Ter Hell Plastic Terez® 3610/4 PA/ABS Blend Impact resistant blend with reduced moisture absorption and good flowability.Application: For molding parts with increased demand of impact strength and cold impact strength. For injection molding..
Melt Flow	30 g/10 min @Load 5.00 kg, Temperature 260 °C	30 g/10 min @Load 11.0 lb, Temperature 500 °F	ISO 1133
Polyram RamLloy PBB104 PC/ABS alloy, Injection Molding PC/ABS alloy for injection molding applicationsInformation provided by Polyram Ram On Ind.
Melt Flow	30 g/10 min @Temperature 230 °C	30 g/10 min @Temperature 446 °F	I<sub>2</sub>; ASTM D1238
Formosa Plastics Formolene® 4181T Injection Molding Polypropylene Homopolymer with Antistat, ESCR AdditivesApplications: For general purpose injection molding applications such as closures.Formolene 4181T is a low viscosity, highly isotactic polypropylene homopoly..
Melt Flow	30 g/10 min @Load 5.00 kg, Temperature 240 °C	30 g/10 min @Load 11.0 lb, Temperature 464 °F	ISO 1133
Covestro Bayblend® FR 3005 Polycarbonate + ABS, Flame Retardant Grade Injection molding gradeeasy-flow gradeVicat/B 120 temperature = 95 °CUL-listing 94 V-0 (1.5 mm) antimony-, chlorine- and bromine-free flame retardantglow wire test (GWFI): 960 °C (2.0 mm)no j..
Melt Flow	30 g/10 min @Load 2.16 kg	30 g/10 min @Load 4.76 lb	Melt flow ratio I10/I2 is 8.5.
Dow HDPE 30460M High Density Polyethylene DOW HDPE 30460M resin is a medium molecular weight distribution copolymer designed to offer moderate impact strength and stress crack resistance with excellent rigidity. This resin has excellent pro..
Melt Flow	30 g/10 min @Load 2.16 kg, Temperature 190 °C	30 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
Braskem PB608 Injection Molding Low Density Polyethylene Injected lids and caps; Large flat surface injected pieces.Information provided by Braskem.
Melt Flow	30 g/10 min @Load 5.00 kg, Temperature 275 °C	30 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133
Azoty Tarnow™ Tarnamid® T-27 GF15 FRV0 Polyamide 6 - Flame Retarded, Reinforced Flame retarded grades, flammability class V0, reinforced with 15% glass fibers, without addition of any halogen compounds, red phosphorus and asbestos, doesn't release any toxic gases during burning..
Melt Flow	30 g/10 min @Load 8.40 kg, Temperature 360 °C	30 g/10 min @Load 18.5 lb, Temperature 680 °F
Performance Polymers IPS II PPL-C1050 PEKK (Polyetherketoneketone) Linear Extrusion Grade Amber pellets; neat resinInformation provided by Infinite Polymer System II.
Melt Flow	30 g/10 min	30 g/10 min
Zylog Hipolyene® 8110 EX Thermoplastic Polyolefin & PP Compound Information provided by Zylog Plastalloys Pvt. Ltd.
Melt Flow	30 g/10 min @Temperature 230 °C	30 g/10 min @Temperature 446 °F	I<sub>2</sub>; ASTM D1238
Formosa Plastics Formolene® 6630A Impact Copolymer Polypropylene Impact Copolymer for Injection Molding Applications Formolene® 6630A is a high impact copolymer of polypropylene designed and formulated for injection-molded applications. It contains a unique comb..
Melt Flow	30 g/10 min @Load 8.70 kg, Temperature 224 °C	30 g/10 min @Load 19.2 lb, Temperature 435 °F	ASTM D1238
Lubrizol Pellethane® 2363-55DE Thermoplastic Polyurethane Elastomer Feature: USP Class VIAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009.
Melt Flow	30 - 33 g/10 min @Load 2.16 kg, Temperature 230 °C	30 - 33 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
Samyang Triel® 5302FR Thermoplastics Polyetherester Elastomer, Non-Halogen Flame Retardancy Excellent mechanical characteristics, elasticity, thermal resistance and chemical resistance.5302FR is a non-halogen, flame retardant grade.Information provided by Samyang.
Melt Flow	30 g/10 min	30 g/10 min	ASTM D1238
Huntsman PE2062 Injection Molding Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics combined with good glossApplications: Injection molding: large moldings including housewares and toys.FDA Notes: Conforms to FDA reg..