Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 0.85 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 0.85 g/10 min
0.85 g/10 min
(Condition L) ASTM D-1238
Multibase Multi-Flex® TPE A 6900 BLK
Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Melt Flow 0.85 g/10 min
0.85 g/10 min
Condition E; ASTM D1238
Chevron Phillips Vytek™ V208C3 Enhanced LLDPE Blown Film Resin  (discontinued **)
Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: excellent dart impact, hot-tack and heat seal properties, good drawdown, can be use..
Melt Flow 0.85 g/10 min
0.85 g/10 min
Condition E; ASTM D1238
Chevron Phillips Vytek™ V208C6 Enhanced LLDPE Blown Film Resin  (discontinued **)
Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: excellent dart impact, hot-tack and heat seal properties, good drawdown, can be use..
Melt Flow 0.85 g/10 min
0.85 g/10 min
Condition E; ASTM D1238
Chevron Phillips Vytek™ V208E9 Enhanced LLDPE Blown Film Resin  (discontinued **)
Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: excellent dart drop impact, hot-tack and heat seal properties, good drawdown, can b..
Melt Flow 0.85 g/10 min
0.85 g/10 min
Condition E; ASTM D1238
Chevron Phillips Dynex™ D5081 Enhanced LLDPE Blown Film Resin  (discontinued **)
Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, ca..
Melt Flow 0.85 g/10 min
0.85 g/10 min
Condition E; ASTM D1238
Chevron Phillips Dynex™ D508A Enhanced LLDPE Blown Film Resin  (discontinued **)
Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, ca..
Melt Flow 0.85 g/10 min

@Load 2.16 kg
0.85 g/10 min

@Load 4.76 lb
ASTM D1238
Reliance Industries Relene E52009 Polyethylene
Relene E52009 is a High Density Polyethylene grade with low gel content, excellent orientation characteristics and negligible water carry-over. This grade is recommended for making raffia tapes and..
Melt Flow 0.85 g/10 min
0.85 g/10 min
LyondellBasell Alathon® L5485 High Density Polyethylene
ApplicationsALATHON L 5485 is a medium molecular weight, high density polyethylene copolymer for use in blown film applications. Typical applications include general purpose HDPE film applications ..
Melt Flow 0.85 g/10 min
0.85 g/10 min
@190c/5000g; ASTM D 1238
Ineos K38-20X2091 HDPE
K38-20X2091 is a yellow medium density polyethylene resin designed specifically for natural gas pipe extrusion. It exhibits excellent long term stress life and slow crack growth resistance. This m..
Melt Flow 0.85 g/10 min
0.85 g/10 min
ISO 1133
Iran Petrochemical (PCC) 2101TN47 Low Density Polyethylene
LDPE 2101TN47 Shrink FilmThis grade enables high speed production of film without blocking.Information provided by Iran Petrochemical Commercial Co.
Melt Flow 0.85 g/10 min

@Load 2.16 kg,
Temperature 190 °C
0.85 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Iran Petrochemical (PCC) LS0085 Low Density Polyethylene
LS0085 is a high molecular weight low density polyethylene film grade combining good flexible extrusion behavior and superior mechanical properties.Application: thin shrink film.Information provided..
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
LyondellBasell Alathon® L5885 High Density Polyethylene
ApplicationsALATHON L 5885 is a medium molecular weight high density homopolymer for use in blown film applications. Typical applications include those low WVTR requirements.Regulatory StatusL 5855..
Melt Flow 0.85 g/10 min

@Load 2.16 kg,
Temperature 190 °C
0.85 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Iran Petrochemical (PCC) LS0085/KJ Low Density Polyethylene
LS0085/KJ is a high molecular weight low density polyethylene film grade combining good flexible extrusion behavior and superior mechanical properties.Application: shrink packaging.Information prov..
Melt Flow 0.85 g/10 min

@Load 2.16 kg,
Temperature 230 °C
0.85 g/10 min

@Load 4.76 lb,
Temperature 446 °F
50% relative humidity; ISO 1133
Borealis BA11CF Polypropylene Copolymer
BA110CF is a heterophasic copolymer. This grade is suitable for use on chill roll processes. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines. ..
Melt Flow 0.85 g/10 min

@Load 2.16 kg
0.85 g/10 min

@Load 4.76 lb
Melt flow ratio I10/I2 is 8.5.
Dow DOWLEX™ 2071 Linear Low Density Polyethylene
DOWLEX® 2071 Polyethylene resin is a linear low density polyethylene resin specifically designed for the manufacture of high strength, thin gauge films for use in applications such as grocery sacks..
Melt Flow 0.85 g/10 min

@Load 2.16 kg
0.85 g/10 min

@Load 4.76 lb
Melt flow ratio I10/I2 is 8.5.
Dow DOWLEX™ 2077 Linear Low Density Polyethylene, Food Grade
DOWLEX® 2077 Polyethylene resin is a fully formulated linear low density polyethylene resin designed for use in food packaging applications. This blown film resin is designed to run on narrow die-g..
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
Dow DOWLEX™ 2077G Linear Low Density Polyethylene
Fast processing on narrow die gaps Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Information provided by Dow
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
Dow DOWLEX™ 2077G Linear Low Density Polyethylene
Fast processing on narrow die gaps Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Information provided by Dow
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
Dow DOWLEX™ 2085G Polyethylene Resin
DOWLEX™ 2085G is an ethylene-octene copolymer designed for general purpose thin gauge film applications. It is perfect for high strength consumer trash bags/liners. This product can be used in ot..
Melt Flow 0.85 g/10 min

@Load 2.16 kg
0.85 g/10 min

@Load 4.76 lb
Melt flow ratio I10/I2 is 8.
Dow DOWLEX™ 2267A Linear Low Density Polyethylene, Blown Film Grade
DOWLEX® 2267A Polyethylene resin is a high performance blown film polymer offering superior load retention and toughness for a variety of stretch film packaging applications. This material complies..
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
Dow DOWLEX™ 2267G Linear Low Density Polyethylene
A high performance stretch film resin Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Information provided by Dow
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
Dow DOWLEX™ 2267G Linear Low Density Polyethylene
A high performance stretch film resin Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Information provided by Dow
Melt Flow 0.85 g/10 min

@Load 2.16 kg
0.85 g/10 min

@Load 4.76 lb
Dow Elite® 5100 Linear Low Density Polyethylene
5100 enhanced polyethylene resin is a copolymer produced via INSITE Technology from Dow Plastics. It offers extremely high impact resistance, combined with excellent tear, tensile, and puncture pro..
Melt Flow 0.85 g/10 min

@Load 2.16 kg
0.85 g/10 min

@Load 4.76 lb
Dow Elite® 5110 Linear Low Density Polyethylene
5110 enhanced polyethylene resin is a copolymer produced via INSITE Technology from Dow Plastics. It offers unique combination of high modulus and excellent impact strength, allowing for downgaugin..
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
Dow ELITE™ 5100G Enhanced Polyethylene Resin
™ 5100G is a copolymer produced via INSITE™ Technology from Dow Plastics. It offers excellent impact strength, good tensile and puncture properties for thick and thin gauge industrial and consume..
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
Dow ELITE™ 5110G Enhanced Polyethylene Resin
™ 5110G is a copolymer produced via INSITE™ Technology from Dow Plastics. It offers a unique combination of high modulus and excellent impact strength, allowing for down gauging in bag applicatio..
Melt Flow 0.85 g/10 min
0.85 g/10 min
Condition E; ASTM D1238
Chevron Phillips Vytek™ V208A3 Enhanced LLDPE Blown Film Resin  (discontinued **)
Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: excellent dart impact, hot-tack and heat seal properties, good drawdown, can be use..
Melt Flow 0.85 g/10 min
0.85 g/10 min
ASTM D1238
M. Holland Company MAGMA® LM115-C LLDPE  (discontinued **)
Additives: Medium Antiblock, Low SlipFeatures: Good Processability, Good Puncture Resistance, Good Tear Strength, Good ToughnessProcessing Method: ExtrusionInformation provided by M. Holland.
Melt Flow 0.85 g/10 min

@Load 2.16 kg,
Temperature 190 °C
0.85 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Borealis Borstar® LE8707 Black Bimodal LLDPE Jacketing Compound for Energy and Communication Cables
Borstar® LE8707 is a black linear low density (LLD) jacketing compound, which is produced with the Borealis proprietary Borstar® bimodal process technology. Borstar® technology allows the manufa..
Melt Flow 0.85 g/10 min
0.85 g/10 min
Condition E; ASTM D1238
Chevron Phillips Dynex™ D508A7 Enhanced LLDPE Blown Film Resin  (discontinued **)
Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, ca..
Copyright © lookpolymers.com All Rights Reserved