Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 0.040 g/10 min | 0.040 g/10 min | ASTM D1238 |
Formosa Plastics Formolene® E904 Film HDPE
(discontinued **) HMW-Bimodal ResinApplications: T-shirt bags, trash can liners, heavy duty bagsInformation provided by Formosa Plastics Corporation, USA. |
|||
Melt Flow | 0.040 g/10 min | 0.040 g/10 min | ASTM D1238 |
LyondellBasell Alathon® L4904 High Density Polyethylene, Pipe and Sheet Extrusion Grade Alathon L4904 is a bimodal, high molecular weight, high density polyethylene resin with excellent processability characteristics that meet the high performance requirements of demanding pressure pip.. |
|||
Melt Flow | 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.040 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Global F-7000 High Density Polyethylene Description-high quality is suitable for blown film @wide range of size & thickness Applications-large & small rolled film, shopping bag, merchant bag, disposal waste bagInformation provided by Glob.. |
|||
Melt Flow | 0.040 g/10 min | 0.040 g/10 min | |
JPJ Technologies 530B HDPE Blow Molding Information provided by JPJ Technologies |
|||
Melt Flow | 0.040 g/10 min | 0.040 g/10 min | |
JPJ Technologies 7600M HDPE Extrusion Information provided by JPJ Technologies |
|||
Melt Flow | 0.040 g/10 min | 0.040 g/10 min | |
JPJ Technologies 7800M HDPE Extrusion Information provided by JPJ Technologies |
|||
Melt Flow | 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.040 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
Iran Petrochemical (PCC) 7000F High Density Polyethylene 7000F is a high density polyethylene for enhanced ultra thin film.Information provided by Iran Petrochemical Commercial Co. |
|||
Melt Flow | 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.040 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
SCG Chemicals EL-Leneâ„¢ H5604F High Density Polyethylene Film Key Characteristics:High tensile strengthHigh dart impactHigh stiffnessLow gel contentGood moisture barrierRecommended Applications: Films for shopping bag, T-shirt bag, garbage bag, liner bagInfor.. |
|||
Melt Flow | 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.040 g/10 min @Load 4.76 lb, Temperature 374 °F |
Condition E; ASTM D1238 |
Formosa Plastics Formolene® E900 Pipe HDPE High Density Polyethylene High Molecular Weight Bi-Modal Resin for Non-Pressure Pipe Extrusion Applications Formolene® E900 is a high molecular weight high density polyethylene (HMW-HDPE) resin des.. |
|||
Melt Flow | 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.040 g/10 min @Load 4.76 lb, Temperature 374 °F |
Condition E; ASTM D1238 |
Formosa Plastics Formolene® E924 Film HDPE High Molecular Weight High Density Polyethylene (HMW-HDPE) for Film Extrusion Formolene® E924 is a bi-modal HMW-HDPE resin designed for high dart impact strength and good processing characteristics.. |
|||
Melt Flow | 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.040 g/10 min @Load 4.76 lb, Temperature 374 °F |
Condition E; ASTM D1238 |
Formosa Plastics Formolene® E924ND Film HDPE High Molecular Weight High Density Polyethylene (HMW-HDPE) for Film Extrusion Formolene® E924ND is a bi-modal HMW-HDPE resin designed for high dart impact strength and good processing characteristi.. |
|||
Melt Flow | 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.040 g/10 min @Load 4.76 lb, Temperature 374 °F |
Condition E; ASTM D1238 |
Formosa Plastics Formolene® E924F Film HDPE High Density Polyethylene High Molecular Weight Bi-Modal Resin for Film Applications Formolene® E924F is a “low gel” high molecular weight grade of HDPE designed for high dart impact strength and.. |