Physical Properties | Metric | English | Comments |
---|---|---|---|
Viscosity | 500000 cP | 500000 cP | Part A, RVT, #7, 2.5 rpm; TM R050-12 |
Resinlab® EP1121-4 Adhesive / Casting Resin Resinlab™ EP1121-4 is a highly filled, high viscosity black adhesive / casting resin designed for applications requiring a high degree of thermal conductivity, flexibility, and a low CTE. It gives .. |
|||
Viscosity | 500000 cP @Shear Rate 250 1/s, Temperature 230 °C |
500000 cP @Shear Rate 250 1/s, Temperature 446 °F |
|
Noltex Soarnol® D2908 Ethylene Vinyl Alcohol Copolymer Ethylene content 29 mol%. Volatile matter 0.3%.The gas barrier property of Soarnol is about forty times better than that of nylon, therefore, Soarnol allows design of lower cost packages by using a.. |
|||
Viscosity | 500000 cP | 500000 cP | RVT, #7, 2.5 rpm; TM R050-12 |
Resinlab® EP1325 Thixotropic, Heat Curing Epoxy Adhesive Resinlab™ EP1325 and EP1325LV are one part thixotropic, heat curing epoxy adhesives. They can also be used as a small mass potting compounds, staking or damming adhesives, or polymer systems where .. |
|||
Viscosity | 500000 cP | 500000 cP | RVT, #7, 2.5 rpm; TM R050-12 |
Resinlab® EP1330 Heat Cure Epoxy Polymer System Resinlab™ EP1330 and EP1330LV are one part heat cure epoxy polymer systems. They can also be used as a small mass potting or staking compounds, or a dam adhesive in and “dam and fill” application.. |
|||
Viscosity | 500000 cP @Shear Rate 1000 1/s, Temperature 400 °C |
500000 cP @Shear Rate 1000 1/s, Temperature 752 °F |
Melt; ASTM D3835 |
Solvay Specialty Polymers AvaSpire® AV-848 Polyaryletherketone (PAEK)
(Unverified Data**) AvaSpire® AV-848 is a high-temperature, polyaryletherketone (PAEK) that offers several key performance advantages over comparable grades of PEEK above 150°C, including better dimensional stability.. |
|||
Viscosity | 500000 cP @Temperature 400 °C |
500000 cP @Temperature 752 °F |
Melt; ISO 11443 |
Victrex® PEEK 600G Polyetheretherketone
(discontinued **) Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low viscosity, FDA food conta.. |
|||
Viscosity | 500000 cP @Shear Rate 50.0 1/s, Temperature 190 °C |
500000 cP @Shear Rate 50.0 1/s, Temperature 374 °F |
estimated from log-log graph |
DuPont Bynel® 3120 Acid-/Acrylate-Modified EVA Adhesive Resin
(discontinued **) Bynel® Series 3100 resins are acid/acrylate-modified ethylene vinyl acetate polymers. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to proce.. |
|||
Viscosity | 500000 cP @Shear Rate 50.0 1/s, Temperature 190 °C |
500000 cP @Shear Rate 50.0 1/s, Temperature 374 °F |
|
DuPont Bynel® E326 Acid-/Acrylate-Modified EVA Adhesive Resin
(discontinued **) Bynel® Series 3100 resins are acid/acrylate-modified ethylene vinyl acetate polymers. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to proce.. |
|||
Viscosity | 500000 - 800000 cP | 500000 - 800000 cP | |
Lord Adhesives 310 High Strength SMC, FRP and General Purpose Epoxy Adhesive Lord Epoxy AdhesivesLord® Epoxy Adhesives create superior bonds for rubber, SMC, plastics and metals. Our epoxy adhesives are widely used in the automotive industry, over 10 million cars and ligh.. |
|||
Viscosity | 500000 cP | 500000 cP | A |
Shin-Etsu Silicones LIMSâ„¢ KE1950-35A/B Elastomer Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Viscosity | 500000 cP | 500000 cP | B |
Shin-Etsu Silicones LIMSâ„¢ KE1950-35A/B Elastomer Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Viscosity | >= 500000 cP | >= 500000 cP | Part A, thixotropic |
Master Bond EP76M-F Electrically Conductive, Two Part Epoxy Description: Master Bond EP76M-F is a two component, nickel filled, electrically conductive epoxy system for high performance bonding, sealing, and coating formulated to cure at room temperature or .. |
|||
Viscosity | 500000 cP | 500000 cP | Mixed |
Tra-Con Tra-Bond 724-14C Polyurethane Adhesive TRA-BOND 724-14C premixed and frozen, polyurethane adhesive is designed for good adhesion, providing strong, resilient bonds to a wide variety of substrates, including aluminum, solder, nylon, mylar.. |
|||
Viscosity | 500000 cP | 500000 cP | dynamic |
Dow Corning 7-3105 PERTOLATUM HIP EMULSION A concentrated emulsion of petrolatum (USP) that is designed to facilitate the rapid development of skin care formulations which contain this emollient. Typical applications include: suncare, body l.. |
|||
Viscosity | 500000 cP @Temperature 160 °C |
500000 cP @Temperature 320 °F |
2.16 kg load; ISO 1133 |
EMS-Griltech Griltex® 11A Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Viscosity | 500000 cP @Temperature 160 °C |
500000 cP @Temperature 320 °F |
2.16 kg load; ISO 1133 |
EMS-Griltech Griltex® 11A Copolyamide Hotmelt Adhesive (Technical Applications) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Viscosity | 500000 cP @Temperature 160 °C |
500000 cP @Temperature 320 °F |
2.16 kg load; ISO 1133 |
EMS-Griltech Griltex® D 1556A Copolyamide Hotmelt Adhesive (Technical Applications) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Viscosity | 500000 cP @Temperature 160 °C |
500000 cP @Temperature 320 °F |
2.16 kg load; ISO 1133 |
EMS-Griltech Griltex® D 1712A Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Viscosity | 500000 cP @Shear Rate 1.00 1/s, Temperature 40.0 °C |
500000 cP @Shear Rate 1.00 1/s, Temperature 104 °F |
cone/plate |
Dow BETAMATE™ 1496 V Epoxy BETAMATE™ 1496 V is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excelle.. |
|||
Viscosity | 500000 cP | 500000 cP | Mixed |
Armstrong A-3/A Epoxy Adhesive A Jet black epoxy paste especially formulated for bonding rigid materials. When used with Activator A or E, A-3 exhibits excellent bonding properties to phenolics, precious stones, ceramics, glass,.. |
|||
Viscosity | 500000 cP | 500000 cP | Mixed |
Armstrong A-4/E Epoxy Adhesive Is a heavy, non-metallic filled, gray paste epoxy that provides excellent thixotropic non-sag bond lines. It can be used for small volume casting applications.Information provided by Ellsworth Adhe.. |
|||
Viscosity | 500000 cP @Shear Rate 300 1/s, Temperature 190 °C |
500000 cP @Shear Rate 300 1/s, Temperature 374 °F |
ASTM D3835 |
Advanced Polymer Alloys Alcryn® 4670 NC Melt Processable Rubber Alcryn melt-processable rubber (MPR) is a true rubber, based on a partially cross-linked, chlorinated olefin interpolymer alloy. Alcryn is designed for the manufacture of rubber parts with high prod.. |
|||
Viscosity | 500000 - 1.20e+6 cP @Shear Rate 100 1/s, Temperature 232 °C |
500000 - 1.20e+6 cP @Shear Rate 100 1/s, Temperature 450 °F |
Melt Viscosity; ASTM D3835 |
Arkema Group KYNAR FLEX® 2900-04 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toughness.. |
|||
Viscosity | 500000 - 1.20e+6 cP @Shear Rate 100 1/s, Temperature 232 °C |
500000 - 1.20e+6 cP @Shear Rate 100 1/s, Temperature 450 °F |
Melt Viscosity; ASTM D3835 |
Arkema Group KYNAR FLEX® 2950-05 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Very flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toug.. |
|||
Viscosity | 500000 - 1.20e+6 cP @Shear Rate 100 1/s, Temperature 232 °C |
500000 - 1.20e+6 cP @Shear Rate 100 1/s, Temperature 450 °F |
Melt Viscosity; ASTM D3835 |
Arkema Group KYNAR® 721 Polyvinylidene Fluoride Powder Characteristics: White, non-hygroscopic powder. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeability, abrasion resistan.. |
|||
Viscosity | 500000 - 1.20e+6 cP | 500000 - 1.20e+6 cP | Thixotropic |
Loctite® Gasket Eliminator® 504 Flange Sealant Anaerobic GasketingLoctite® 504 Gap Filling Rigid Cure Gasket Eliminator® Flange SealantA single-component, instant low pressure seal that fills gaps to 0.030". Typical Use: Gap filling |
|||
Viscosity | 500000 - 800000 cP @Shear Rate 100 1/s, Temperature 232 °C |
500000 - 800000 cP @Shear Rate 100 1/s, Temperature 450 °F |
Melt Viscosity; ASTM D3835 |
Arkema Group KYNAR FLEX® 2850 PC Polyvinylidene Fluoride Spray Coating Powder Electrostatic sprayInformation provided by Arkema Inc. |
|||
Viscosity | 500000 cP @Shear Rate 50.0 1/s, Temperature 190 °C |
500000 cP @Shear Rate 50.0 1/s, Temperature 374 °F |
|
DuPont Nucrel® 1207 Ethylene-Methacrylic Acid Copolymer Resin for Extrusion Coating/Laminating
(discontinued 12 wt% Methacrylic Acid.Nucrel® 1207 is an ethylene-methacrylic acid copolymer resin available for use in conventional extrusion coating, coextrusion coating, and extrusion laminating equipment des.. |
|||
Viscosity | 500000 - 1.10e+6 cP | 500000 - 1.10e+6 cP | at 2.5 RPM |
Loctite® Output™ 383 Acrylic Adhesive Acrylic Bonding Adhesives and Thermally Conductive BondersLoctite® Acrylic Adhesives were developed for bonding applications that require tensile, shear and peel strength combined with maximum impa.. |