Physical Properties | Metric | English | Comments |
---|---|---|---|
Viscosity | 90.0 - 100000 cP | 90.0 - 100000 cP | Average value: 4830 cP Grade Count:41 |
Overview of materials for Thermoset Polyurethane, Liquid This property data is a summary of similar materials in the MatWeb database for the category "Thermoset Polyurethane, Liquid". Each property range of values reported is minimum and maximum values of.. |
|||
Viscosity | 50000 - 100000 cP @Temperature 25.0 °C |
50000 - 100000 cP @Temperature 77.0 °F |
|
Northstar Polymers MPC-070 Prepolymer Information provided by Northstar Polymers. |
|||
Viscosity | 70000 - 100000 cP | 70000 - 100000 cP | |
Lord Adhesives Metech 7801 Cermet Resistor Overglaze Composition Resistor overglaze composition 7801 is a laser trimable, green colored glaze designed to be printed and fired over thick film resistors. 7801 improves the stability of laser or air-abrasive trimmed .. |
|||
Viscosity | 80000 - 100000 cP | 80000 - 100000 cP | A |
ITW Plexus Plexusâ„¢ MA420FS Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.All purpose adhesive, very fast curing.Information provided by Illinois Tool Works. |
|||
Viscosity | 90000 - 100000 cP @Temperature 23.0 °C |
90000 - 100000 cP @Temperature 73.4 °F |
|
Master Bond EP15 High Tensile Strength One Component Epoxy Master Bond Polymer System EP15 is a one component, heat curing epoxy featuring high tensile strength utilized in testing the adhesion and/or cohesive strength of flame-sprayed coatings. This standa.. |
|||
Viscosity | 95000 - 100000 cP | 95000 - 100000 cP | Accelerator |
3M Scotch-Weld™ DP810NS Structural Adhesive 3M™ Scotch-Weld™ Low-Odor Acrylic Adhesives are two-part, 1:1 mix ratio, toughened structural adhesives with less odor than most acrylic adhesives. The adhesives have excellent shear and peel stre.. |
|||
Viscosity | 30000 - 100000 cP | 30000 - 100000 cP | Thixotropic |
Loctite® 574 Semi-rigid Cure Anaerobic Sealant Anaerobic GasketingLoctite® 574 Semi-rigid Cure Anaerobic SealantRecommended Primer: 7649 (N). Typical Use: Fast curing, large gaps |