Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Index of Compound = 6.0 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Index of Compound 6.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
6.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Polykemi AB POLYfill PPH GF5020 HC Polypropylene Homopolymer, Glass Fiber Reinforced
Information provided by Polykemi AB
Melt Index of Compound 6.0 g/10 min

@Load 5.00 kg,
Temperature 300 °C
6.0 g/10 min

@Load 11.0 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® 4701R PC (Europe-Africa-Middle East)
LEXAN 4701R is a copolymer of polyphthalate carbonate resin for applications requiring high heat resistance. This grade has higher heat properties compared to Lexan 4501.
Melt Index of Compound 6.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
6.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® AD4820 PC (Europe-Africa-Middle East)
LEXAN AD4820 is a high viscosity grade exhibiting low dust attraction with a UV cut-off up to 400 nm and greater optical purity than standard resin.
Melt Index of Compound 6.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
6.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® HPS6 PC
Med/low flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam e-beam and gamma sterilizable. ..
Melt Index of Compound 6.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
6.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® OQ3820 PC (Asia Pacific)
High Viscosity, UV-stabilized grade for ophthalmic lenses.
Melt Index of Compound 6.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
6.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® SD1278 PC Copolymer
Lexan* SD1278 polycarbonate (PC) siloxane copolymer resin is a transparent extrusion grade for food contact applications for sheet extrusion. This resin offers extreme low temperature (-40 °C) ..
Melt Index of Compound 6.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
6.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® SD1278 PC Copolymer (Asia Pacific)
Lexan* SD1278 polycarbonate (PC) siloxane copolymer resin is a transparent extrusion grade for food contact applications for sheet extrusion. This resin offers extreme low temperature (-40 °C) ..
Melt Index of Compound 6.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
6.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
ICO Polymers ICORENEâ„¢ 155-4060 LMDPE Rotational Molding Resin
Description: ICORENE 155-4060 is a linear medium density polyethylene developed for use in rotational molding. It has a great combination of stiffness and toughness in a resin that is easy processi..
Melt Index of Compound 6.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
6.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
ICO Polymers ICORENEâ„¢ 190-3561 LMDPE Rotational Molding Resin
Description: ICORENE 190-1332 is a linear medium density polyethylene copolymer developed for rotational molding. It has a good balance of properties such as toughness, easy flow and stiffness. Ke..
Melt Index of Compound 6.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
6.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics PC0700 PC (Asia Pacific)
PC0700 resin is a low flow (MFR = 7 at 300?C/1.2kg), heat stabilized, polycarbonate product designed for use in the custom compounding market. It does not contain UV stabilizer or mold release.
Melt Index of Compound 6.0 g/10 min

@Load 5.00 kg,
Temperature 265 °C
6.0 g/10 min

@Load 11.0 lb,
Temperature 509 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Xenoy® X4830 PBT+PC (Europe-Africa-Middle East)
Xenoy X4830 is a hydrostable, high modulus, low temperature ductile PC/PBT blend. Furthermore, this resin provides high chemical resistance, very low creep, low CTE, excellent fatique and high heat ..
Melt Index of Compound 6.0 - 11 g/10 min
6.0 - 11 g/10 min
Sibur 21080 Superior Quality Polypropylene for Production of Syringe
For production of syringe and products of complicated profile for technical and domestic purpose.
Melt Index of Compound 6.0 g/10 min

@Load 10.0 kg,
Temperature 280 °C
6.0 g/10 min

@Load 22.0 lb,
Temperature 536 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics NORYL NH8006 PPE+HIPS (Asia Pacific)
Noryl* NH8006 resin is a 30% glass reinforced, modified PPE-PS blend. The material uses non-halogenated flame retardants to achieve a UL94 V0 flame rating (color specific) while offering an exceptio..
Melt Index of Compound 6.0 g/10 min

@Load 1.20 kg,
Temperature 280 °C
6.0 g/10 min

@Load 2.65 lb,
Temperature 536 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics NORYL PX1005X PPE+HIPS (Europe-Africa-Middle East)
Noryl PX1005X is an unfilled, low heat resistance, halogen free (according VDE/DIN 472 part 813) flame retardant material.
Melt Index of Compound 6.0 g/10 min

@Load 5.00 kg,
Temperature 280 °C
6.0 g/10 min

@Load 11.0 lb,
Temperature 536 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics NORYL PPX PPX830 PPE+PP (Europe-Africa-Middle East)
Noryl* PPX830 Polyphenylene Oxide (PPO*) + Polypropylene (PP) resin is a 30 % Glass Reinforced, injection moldable grade with a HDT /1.8MPa temperature resistance of 153 deg C and a Tensile modulus ..
Melt Index of Compound 6.0 - 7.0 g/10 min
6.0 - 7.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® CP812 Stabilized Compounded Rotational Molding Resin
DescriptionPolyaxis CP 812 is a stabilized compounded rotational molding resin with a combination of good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from ..
Melt Index of Compound 6.0 g/10 min
6.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® LP624 Stabilized High Density Polyethylene
DescriptionPolyaxis CP 624 is a stabilized high density polyethylene rotational molding compound with good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from..
Melt Index of Compound 6.0 - 8.0 g/10 min
6.0 - 8.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® LPA815 LPA 815EVA
DescriptionPolyaxis LPA 815 is an EVA which is soft an pliable, even at low temperatures.NOTE: Physical properties are based on rotationally molded samples from unpigmented resin. Density and ESCR ..
Melt Index of Compound 6.0 g/10 min
6.0 g/10 min
ASTM D1238
DuPont Elvax® 260 Ethylene-Vinyl Acetate Copolymer Resin
Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with..
Melt Index of Compound 6.0 g/10 min
6.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® LP624 Stabilized High Density Polyethylene
DescriptionPolyaxis CP 624 is a stabilized high density polyethylene rotational molding compound with good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from..
Melt Index of Compound 6.0 g/10 min
6.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® LP624 Stabilized High Density Polyethylene
DescriptionPolyaxis CP 624 is a stabilized high density polyethylene rotational molding compound with good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from..
Melt Index of Compound 6.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
6.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
Cond. E; ISO 1133
A. Schulman FORMION™ FI 105 Non-Reinforced, Injection Molding Grade Sodium Ionomer
DescriptionFormion® FI 105 is a non-reinforced, transparent, injection molding grade Sodium Ionomer. It has been formulated for high durability, scratch resistance, low temperature ductility, and ..
Melt Index of Compound 6.0 - 7.0 g/10 min
6.0 - 7.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® CP812 Stabilized Compounded Rotational Molding Resin
DescriptionPolyaxis CP 812 is a stabilized compounded rotational molding resin with a combination of good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from ..
Melt Index of Compound 6.0 g/10 min
6.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® LP624 Stabilized High Density Polyethylene
DescriptionPolyaxis CP 624 is a stabilized high density polyethylene rotational molding compound with good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from..
Melt Index of Compound 6.0 - 7.0 g/10 min
6.0 - 7.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® CP812 Stabilized Compounded Rotational Molding Resin
DescriptionPolyaxis CP 812 is a stabilized compounded rotational molding resin with a combination of good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from ..
Melt Index of Compound 6.0 - 7.0 g/10 min
6.0 - 7.0 g/10 min
2.16/190; ASTM D1238
A. Schulman POLYAXIS® CP812 Stabilized Compounded Rotational Molding Resin
DescriptionPolyaxis CP 812 is a stabilized compounded rotational molding resin with a combination of good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from ..
Melt Index of Compound 6.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
6.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D-1238
Chevron Phillips Marlex® HMN TR-945/945G Polyethylene; HDPE
High density polyethylene. These hexene copolymers are tailored for rotational molding applications that require: Wide process windows and excellent flowLong-term UV stabilizationGood impact stren..
Melt Index of Compound 6.0 g/10 min

@Load 21.6 kg,
Temperature 150 °C
6.0 g/10 min

@Load 47.6 lb,
Temperature 302 °F
Fainplast
Fainplast Compounds HAX HF 4221 Halogen Free PVC
General purpose
Melt Index of Compound 6.0 - 8.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
6.0 - 8.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
Arkema Group LOTRYL® 28 MA 07 Copolymer Ethylene - Methyl Acrylate
LOTRYL® 28 MA 07 is a random copolymer of ethylene and methyl acrylate made by high-pressure radicalar polymerisation process. Due to the high methyl acrylate content, LOTRYL® 28 MA 07 is a polyme..
Melt Index of Compound 6.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
6.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
cm3/10 min; ISO 1133
DuPont Performance Polymers Delrin® FG311DP NC010 Acetal Homopolymer  (Unverified Data**)
Delrin® FG311DP is a medium-high viscosity acetal homopolymer, with improved thermal stability and modifications for more precise molding. It has been developed for consideration into applications ..
Copyright © lookpolymers.com All Rights Reserved