Physical Properties | Metric | English | Comments |
---|---|---|---|
Viscosity | 70000 cP @Temperature 25.0 °C |
70000 cP @Temperature 77.0 °F |
|
Northstar Polymers MPA-135 MDI Ether Prepolymer Information provided by Northstar Polymers. |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 464 °F |
|
DSM Novamid® 2320J PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 500 °F |
|
DSM Novamid® 2320J PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 536 °F |
|
DSM Novamid® 2320J PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 464 °F |
|
DSM Novamid® 2420A PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 500 °F |
|
DSM Novamid® 2420A PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 536 °F |
|
DSM Novamid® 2420A PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 464 °F |
|
DSM Novamid® 2620A PA6/6T Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 500 °F |
|
DSM Novamid® 2620A PA6/6T Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 536 °F |
|
DSM Novamid® 2620A PA6/6T Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 500 1/s, Temperature 320 °C |
70000 cP @Shear Rate 500 1/s, Temperature 608 °F |
ISO 11403-1 -2 |
DuPont Performance Polymers Zytel® 330 NC010 Nylon
(Unverified Data**) Unreinforced PolyamideZytel 330 NC010 is a transparent polyamide resin with amorphous characteristics.Information provided by DuPont Performance Polymers |
|||
Viscosity | 70000 cP @Frequency 1000 Hz, Temperature 292 °C |
70000 cP @Frequency 1000 Hz, Temperature 558 °F |
|
Akro-Plastic Akroloy® PA GF 50 (2706) PA 6.6 & PA6I/6T Dry, 50% Glass Filled One of the most characteristic properties of polyamide (PA 6.6) is the absorption of moisture. This essentially leads to increased toughness and elongation at break, to name the most important param.. |
|||
Viscosity | 70000 cP @Temperature 0.000 °C |
70000 cP @Temperature 32.0 °F |
|
BASF Palamoll® 656 Polymeric Plasticizer Description: Palamoll® 656 is a high viscosity polymeric plasticizer that is compatible with PVC. It is based on adipic acid and polyhydric alcohols. It is resistant to oils, fats, aliphatic hydro.. |
|||
Viscosity | 70000 cP @Temperature 25.0 °C |
70000 cP @Temperature 77.0 °F |
at 2 rpm vibration |
Permabond A1044 Anaerobic Threadsealant Permabond® A1044 is a rapid curing sealant designed to lock and seal metal pipe connections, offering very good resistance to even the most aggressive chemicals. Permabond A1044 can be used to seal.. |
|||
Viscosity | 70000 - 80000 cP @Temperature 25.0 °C |
70000 - 80000 cP @Temperature 77.0 °F |
ET514B, Polyamine Hardener |
Permabond ET514 Epoxy Resin PERMABOND ET514 is a 1:1 mixable epoxy adhesive. It has excellent resistance to impact and vibration and is ideal for structural bonding of metal, wood, composites and certain plastics. Its rapid cu.. |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 464 °F |
|
DSM Novamid® 2420J PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 500 °F |
|
DSM Novamid® 2420J PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 536 °F |
|
DSM Novamid® 2420J PA666 Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 464 °F |
|
DSM Novamid® 2620J PA6/6T Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 500 °F |
|
DSM Novamid® 2620J PA6/6T Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C |
70000 cP @Shear Rate 10000 1/s, Temperature 536 °F |
|
DSM Novamid® 2620J PA6/6T Extrusion |
|||
Viscosity | 70000 cP @Shear Rate 5000 1/s, Temperature 285 °C |
70000 cP @Shear Rate 5000 1/s, Temperature 545 °F |
ISO 11403-1 -2 |
DuPont Performance Polymers Rynite® 545 NC010 Polyethylene Terephthalate (PET)
(Unverified Data**) 45% Glass Reinforced Polyethylene Terephthalate Rynite 545 NC010 is a 45% glass reinforced modified polyethylene terephthalate with greater strength and stiffness excellent dimensional stability and.. |
|||
Viscosity | 70000 cP @Temperature 25.0 °C |
70000 cP @Temperature 77.0 °F |
at 2 rpm vibration |
Permabond A134 Anaerobic Retainer Permabond® A134 is a high-strength anaerobic product designed for the permanent locking and sealing of metal parts. Its 'non-drip' formulation makes it suitable for use on larger fittings, coarse t.. |