Physical Properties | Metric | English | Comments |
---|---|---|---|
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Tapped |
Nyco NYAD® 400 Wollastonite Chemically treated powdered grade.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an .. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Loose |
Nyco NYAD® M100 Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Tapped |
Nyco NYAD® M325 Wollastonite Powdered grade.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance m.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Tapped |
Nyco NYAD® MD325 Wollastonite Powdered grade.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance m.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Tapped |
Nyco NYGLOS® MSTPO Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Bulk Density | 1.10 - 1.20 g/cc | 0.0397 - 0.0434 lb/in³ | |
Nabaltec GRANALOX® NM 9916 F Ceramic Body Nabaltec's GRANALOX® Ceramic bodies are produced under rigid quality control of green and sintered density, shrinkage, porosity, loss on ignition and granulate size. The properties of the corundum .. |
|||
Bulk Density | 1.10 - 1.30 g/cc | 0.0397 - 0.0470 lb/in³ | |
Nabaltec NABALOX® NO 625-31 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Nabaltec NABALOX® NO 635 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Nabaltec NABALOX® NO 645 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Packed |
Omya SNOWHITE® 3 - PT Calcium Carbonate A dry ground calcium carbonate with excellent fineness, color, and dispersion characteristics.Applications: Employed in rubber and plastic applications such as rigid PVC and plasticized PVC. Also us.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Zircar Zirconia HfF-15 Hafnia Knit Textile Insulation Our hafnia (HfO2) fibers and textiles are made by the same unique Zircar process used for manufacturing yttria-stabilized zirconia cloths and felts. Our high purity hafnia fiber and textiles are off.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | ASTM D4894 |
3M Dyneon™ CC655 PTFE, 50% Stainless Steel Filled
(discontinued **) Type II, free flowing.Typical Applications: Finished or semi-finished parts: sheets, rods, tubes, billets for skiving of films or machining into complex shapes.Information provided by the Dyneon div.. |
|||
Bulk Density | 1.10 - 1.20 g/cc | 0.0397 - 0.0434 lb/in³ | |
Inhance Fluoro-Seal INHANCE® Ti-9000 Titanium Carbide Product Description: INHANCE Ti-9000 consists of spherically shaped titanium carbide micro grains. This product is used to make other INHANCE polymer alloys. When incorporated in polymers, unique .. |
|||
Bulk Density | 1.10 - 1.20 g/cc | 0.0397 - 0.0434 lb/in³ | |
Inhance Fluoro-Seal INHANCE® Ti-9100 Titanium Carbide Polymer Alloy Product Description: INHANCE Ti-9100 polymer alloy consists of spherically shaped titanium carbide micro grains coated with a thin layer of a proprietary coupling agent. This product was designed .. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Tap Density |
Momentive Performance Materials HCR48 Boron Nitride (BN) Powder GE Advanced Ceramics boron nitride (BN) powder grades HCR48, HCJ48, and HCM are large, high-density agglomerates, of ~10 µm crystals, with average particle sizes between 175-275 µm and tap den.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Sharadaa Ceramics 29 Insulation Bricks-ASTM Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rota.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Sharadaa Ceramics HF 60 AL Insulation Brick Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rota.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Dried at 110°C |
Sharadaa Ceramics REFINSUL 9 Insulating Castables Medium/High Purity Description: We offer our clients Insulating Castables that are available in medium as well as high purity. Widely used in various industries, these are renowned for their strength and heat resistan.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Sharadaa Ceramics HFK Insulation Brick Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rota.. |
|||
Bulk Density | <= 1.10 g/cc | <= 0.0397 lb/in³ | Dried at 110°C |
Sharadaa Ceramics REFINSUL ZAP-016 Insulating Castables Description: We provide our clients a range of Insulating Castables, that are used as backup layer in process industries and hot face layer in petrochemical industry. These castables are known for l.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Size C (tapped) |
Vesta Ceramics SicoMill® Grade 2 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Size C (tapped) |
Vesta Ceramics SicoMill® Grade 4 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Zircar Zirconia HfF-15 Hafnia Knit Textile Insulation Our hafnia (HfO2) fibers and textiles are made by the same unique Zircar process used for manufacturing yttria-stabilized zirconia cloths and felts. Our high purity hafnia fiber and textiles are off.. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
DuPont™ Nomex® 410 Paper, 30 mil Nominal Thickness Nomex® Type 410 is a calendared insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility, and resilience. It is the original form of Nomex® paper and is .. |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | |
Daikin NEOFLON M-300P PCTFE Pellets NEOFLON PCTFE M-300 series is used for general purpose applications.Description:Pellets.Processing Methods: Extrusion.Uses: Rods, small parts.Information provided by Daikin Industries. |
|||
Bulk Density | >= 1.10 g/cc | >= 0.0397 lb/in³ | |
Chosun Refractories C-1 Insulating Firebrick Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET). |
|||
Bulk Density | >= 1.10 g/cc | >= 0.0397 lb/in³ | |
Chosun Refractories HL-16 Special Insulating Firebrick Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET). |
|||
Bulk Density | 1.10 g/cc | 0.0397 lb/in³ | Dispersion; ASTM D1298 |
3M Dyneon™ PFA 6910GZ Fluoroplastic Dispersion 3M™ Dyneon™ PFA 6910GZ is a 50% solids fluorothermoplastic aqueous dispersion. It is a copolymer of tetrafluoroethylene and perfluorinated comonomers, with a melt viscosity several orders of magni.. |