Physical Properties | Metric | English | Comments |
---|---|---|---|
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | Tapped |
Nyco 10 AS WOLLASTOCOAT® Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | Tapped |
Nyco 10 WOLLASTOCOAT® Wollastonite Chemically treated grade. This grade is recommended for polymer reinforcement.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctiv.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
Nabaltec NABALOX® NO 201P Soft Ground Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 0.850 - 0.950 g/cc | 0.0307 - 0.0343 lb/in³ | PEPL-10-W-67 |
Pearl Engineering PEPLPET B-113C PET Sheet Grade Used mainly for box strapping. |
|||
Bulk Density | 0.849 g/cc | 0.0307 lb/in³ | Vibrated; ASTM D1895 |
Eastman Aqua 18696 PET
(discontinued **) Voridian Aqua thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. Containers made from 186.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | DIN 53466 |
3M Dyneon™ PFA 6502TA Perfluoroalkoxy Fluorothermoplastic
(discontinued **) Dyneon PFA 6502TA is a fluorothermoplastic resin developed for compression molding applications. PFA 6502TA has a wide processing window with excellent color stability when longer residence times or.. |
|||
Bulk Density | <= 0.850 g/cc | <= 0.0307 lb/in³ | |
Magyar Aluminum ALOLT 38AF Aluminum Hydroxide Ground type |
|||
Bulk Density | <= 0.850 g/cc | <= 0.0307 lb/in³ | |
Magyar Aluminum ALOLT 720 Aluminum Hydroxide Viscosity Optimized Type |
|||
Bulk Density | 0.850 - 0.950 g/cc | 0.0307 - 0.0343 lb/in³ | After drying at 110°C |
Gouda Vuurvast GOLITE 125 R GM Refractory Insulating Castable Description: Golite 125 R GM has a low Fe2O3 content and a very low density. Commonly used in reducing conditions in the petrochemical industry.Remarks: These values apply to cast products.Informati.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
Sharadaa Ceramics 60LBD Insulation Brick Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rota.. |
|||
Bulk Density | <= 0.850 g/cc | <= 0.0307 lb/in³ | Dried at 110°C |
Sharadaa Ceramics REFINSUL ZAP-014 Insulating Castables Description: We provide our clients a range of Insulating Castables, that are used as backup layer in process industries and hot face layer in petrochemical industry. These castables are known for l.. |
|||
Bulk Density | 0.850 - 0.950 g/cc | 0.0307 - 0.0343 lb/in³ | DIN 53466 |
Stanelco Bioplast® Wrap 100 Biodegradable Plastic Bioplast Wrap 100 is a plasticiser-free thermoplastic material which allows the production of films with coated paper-like properties. Wrap 100 is an excellent, eco-friendly alternative to laminated.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | ASTM D1895 |
Sumitomo Bakelite Durez® 32245 Phenolic, Compression Grade Durez 32245 Black Phenolic is a two-stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stabilit.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | ASTM D1895 |
Sumitomo Bakelite Durez® 32245 Phenolic, Injection Grade Durez 32245 Black Phenolic is a two-stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stabilit.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | ASTM D1895 |
Plenco 6343 Phenolic, Granular, Compression Molded PLENCO 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recogniz.. |
|||
Bulk Density | 0.849 g/cc | 0.0307 lb/in³ | Loose |
Excalibar ExCal® CW 325 Calcium Carbonate CaCO3 Powder ExCal® CW calcium carbonate products are processed from a high-purity ore, to exacting specifications at the Houston, Texas plant. These grades are processed for use in plastics, rubber, coatings,.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
Daikin NEOFLON EA-LR43 ETFE Pellets Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl.. |
|||
Bulk Density | 0.849 g/cc | 0.0307 lb/in³ | DAK-QAR-SOP-0018 |
DAK Americas Array™ 9921M PET Product Description: Array™ 9921M is unique copolymer particularly suited for use in the pharmaceutical and medical applications where clarity and gloss is desired. It is a medium intrinsic viscosi.. |
|||
Bulk Density | 0.849 g/cc | 0.0307 lb/in³ | DAK-QAR-SOP-0018 |
DAK Americas Laser+® C 9921 (F65A) PET Product Description: Laser+® 9921 (F65A) is a unique copolymer particularly suited for use in the custom PET container applications where clarity and injection molding performance is desired. It is.. |
|||
Bulk Density | 0.849 g/cc | 0.0307 lb/in³ | DAK-QAR-SOP-0018 |
DAK Americas Laser+® HS CF746A (D53A) PET Product Description: Laser+® HS CF746A (D53A) polyethylene terephthalate (PET) resin is designed for conversion to PET packaging by injection stretch blow-molding using commercial heat-set technolo.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® N2520 L POM Description: Is a POM, product having reduced electric surface resistance.Information provided by BASF |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® N2650 Z4 POM + PUR Description: Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also for components subject to impact stress.Information provided by BAS.. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® S2320 0035 LEV POM Description: Is a POM, free-flowing and rapidly solidifying standard grade with reduced emission potential for injection molding.Information provided by BASF |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® W2320 U03 POM Description: Very free-flowing, rapidly solidifying grade with UV stabilization for use where processing is extremely difficult but mechanical requirements are lower.Information provided by BASF |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® W2320 U035 LEV POM Description: Is a POM, UV-stabilized, very free-flowing, rapidly solidifying grade for injection molding, with reduced emission potential.Information provided by BASF |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® Z2320 003 POM Description: Is a POM, rapidly solidifying grade for applications with exceptional demands on flowability.Information provided by BASF |
|||
Bulk Density | 0.849 g/cc | 0.0307 lb/in³ | |
3M Dyneon™ FX 5929 Polymer Processing Additive Information provided by the Dyneon division of 3M. |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® S2320 003 PRO POM Description: Is a POM, is a standard flowing and rapidly freezing grade suitable for standard functional applications.Information provided by BASF |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | |
BASF Ultraform® N2650 Z6 POM + PUR Description: Elastomer-modified injection molding grade for applications requiring highest impact strength together with low stiffness.Information provided by BASF |
|||
Bulk Density | 0.850 g/cc | 0.0307 lb/in³ | Powder Density; ASTM D1895 |
Sumitomo Bakelite North America TEM 9053C Hardware Grade Epoxy Short fiberglass and mineral filled, toughened epoxy molding compound with excellent dimensional stability and high strength properties.Information provided by Vyncolit, a Sumitomo Bak Group |