Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Density = 2.15 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Density 2.15 - 2.25 g/cc
0.0777 - 0.0813 lb/in³
ASTM D792
Polikim EFALON® C-15 PTFE, 15% Glass Filled
C15 and C25 have less thermal expansion, higher wear resistance and less deformation under load compared to virgin Efalon® (PTFE). Applications: Seals, Seal rings, gaskets, valve sets, piston rings..
Density 2.15 g/cc
0.0777 lb/in³
ASTM D4894
3M Dyneon™ 1620 PTFE Powder  (discontinued **)
Type II, gr. 3 PTFE. The unique properties of polytetrafluoroethylene (PTFE) makes it an indispensable material for modern industry. PTFE offers the following exceptional characteristics:Inert to a..
Density 2.15 g/cc
0.0777 lb/in³
ASTM D4894
3M Dyneon™ 1645 PTFE Powder  (discontinued **)
Type IV, gr. 2 PTFE. The unique properties of polytetrafluoroethylene (PTFE) makes it an indispensable material for modern industry. PTFE offers the following exceptional characteristics:Inert to a..
Density 2.15 g/cc
0.0777 lb/in³
ASTM D4895
3M Dyneon™ TFM™ 2001 Modified PTFE Paste Extrusion Powder  (discontinued **)
Type I, gr. 2 PTFE. Free flowing powder. Minimum reduction ratio is 20; Max is 1000. Average particle size 500µm.Modified PTFE fine powder product for paste extrusion applications. The modified ..
Density 2.15 g/cc
0.0777 lb/in³
Sintered moldings; ASTM D4894/D4895
3M Dyneon™ TF 2024 PTFE Paste Extrusion Powder  (discontinued **)
Type I PTFE. Free flowing powder. Minimum reduction ratio is 20; Max is 500. Average particle size 500µm. Used for unsintered tapes and sealing cords.Dyneon offers a family of PTFE fine powder ..
Density 2.15 g/cc
0.0777 lb/in³
Sintered moldings; ASTM D4894/D4895
3M Dyneon™ TF 2029 PTFE Paste Extrusion Powder  (discontinued **)
Type I PTFE. Free flowing powder. Minimum reduction ratio is 5; Max is 100. Average particle size 500 µm. Used for electrical insulating tapes, liners, and yarns.Dyneon offers a family of PTFE ..
Density 2.15 g/cc
0.0777 lb/in³
Sintered moldings; ASTM D4894/D4895
3M Dyneon™ TF 4303 PTFE 15% Graphite Filled  (discontinued **)
Type II PTFE. Applications include sliding surfaces, bearings, seals/gaskets.Data provided by Dyneon.
Density 2.15 g/cc
0.0777 lb/in³
Sintered moldings; ASTM D4894/D4895
3M Dyneon™ TF 4220 PTFE 2% Cond. Pigm. Filled  (discontinued **)
Applications include antistat linings, seals, gaskets, moldings.Data provided by Dyneon.
Density 2.15 g/cc
0.0777 lb/in³
ISO 12086
3M Dyneon™ TF 2021 PTFE  (discontinued **)
Processable by standard paste extrusion methodsBoth grades can be processed at low to medium reduction ratiosTF 2021 PTFE is preferred for unsintered thread sealing tapes and expanded joint sealants..
Density 2.15 g/cc
0.0777 lb/in³
ASTM D4895
3M Dyneon™ TF 2025 PTFE  (discontinued **)
Processable by standard paste extrusion methodsBoth grades can be processed at low to medium reduction ratiosTF 2021 PTFE is preferred for unsintered thread sealing tapes and expanded joint sealants..
Density 2.15 g/cc
0.0777 lb/in³
ISO 12086
3M Dyneon™ TF 2029 PTFE  (discontinued **)
Processable by standard paste extrusion methodsDesigned for low reduction ratiosCan be processed at a high stretch ratiosRecommended for apes requiring high mechanical strength, such as electrical t..
Density 2.15 g/cc
0.0777 lb/in³
ISO 12086
3M Dyneon™ TF 2053 PTFE  (discontinued **)
Processed by standard paste extrusion methodRecommended grade for extrusion of tubing and cables requiring only moderately high reduction ratioGood overall balance of mechanical properties and proce..
Density 2.15 - 2.18 g/cc
0.0777 - 0.0788 lb/in³
DIN 53479
Fluorseals PTFE Unfilled
Information provided by TEKU GmbH Fluorkunststoffe, a distributor of Fluorseals materials.
Density 2.15 g/cc
0.0777 lb/in³
Apparent
Gouda Vuurvast A Vuurvast Dense Refractory Brick
Description: A general purpose high quality fireclay brick for use up to 1400°C. Reasonably good thermal shock resistance.Remarks: This data represents average values, obtained from samples that ..
Density 2.15 g/cc

@Temperature 25.0 °C
0.0777 lb/in³

@Temperature 77.0 °F
Schott Glass 8228 Intermediate sealing glass
Used for sealing to Quartz Glass and Glass 8229 The heavy metal content for the elements lead, cadmium, mercury, and hexavalent chromium is below 100 ppmInformation provided by SCHOTT AG.
Density 2.15 g/cc
0.0777 lb/in³
ASTM D792
ScanTube FEP Tubing
Information provided by ScanTube, Inc.
Density 2.15 g/cc
0.0777 lb/in³
ASTM D792
ScanTube MFA Tubing
Information provided by ScanTube, Inc.
Density 2.15 g/cc
0.0777 lb/in³
ASTM D792
ScanTube PTFE Tubing
Information provided by ScanTube, Inc.
Density 2.15 - 2.19 g/cc
0.0777 - 0.0791 lb/in³
BS2782:Pt6
Dalau Dalcon 086 100% Virgin PTFE modified polymer
Applications & Industries: General: The static and dynamic friction coefficient are numerically equal, consequently no ’Stick Slip’ occurs. Modified PTFE has an advantage over Homopolymer (Normal ..
Density 2.15 g/cc
0.0777 lb/in³
ISO 1183
Azoty Tarnow™ TARFLEN SG-1 PTFE
Free-Flowing suspension powder for automated compression molding of complicated shapes and isostatic pressing.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
Density 2.15 g/cc
0.0777 lb/in³
ISO 1183
Azoty Tarnow™ TARFLEN SM-2 PTFE
Non Free Flowing suspension powder for standard compression molding and compounding.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
Density 2.15 g/cc
0.0777 lb/in³
ISO 1183
Azoty Tarnow™ TARFLEN ST PTFE
Free-Flowing suspension powder for ram extrusion of rods, pipes and other profiles.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
Density 2.15 g/cc
0.0777 lb/in³
Sintered Sheets; DIN EN ISO 12086
3M Dyneon™ TFM™ 2001Z PTFE
Dyneon™ TFM™ 2001 Z PTFE is an ideal grade for high-performance applications with reduction ratios up to 1000:1. This product has a denser polymer texture providing lower gas permeability than sta..
Density 2.15 g/cc
0.0777 lb/in³
DIN EN ISO 12086
3M Dyneon™ TF 2021Z PTFE Fine Powder
Dyneon TF 2021 Z PTFE is an ideal grade for pipe liner applications because of its outstanding green strength. It is the preferred grade for unsintered thread sealing tapes, expanded join sealings, ..
Density 2.15 g/cc
0.0777 lb/in³
DIN EN ISO 12086
3M Dyneon™ TF 2029Z PTFE Fine Powder
Dyneon™ TF 2029 Z PTFE is an ideal grade for tapes with high mechanical strength, such as electrical tape for wrapped insulations or flat cables. Also ideal for yarn applications, including sewing ..
Density 2.15 g/cc
0.0775 lb/in³
Devcon Wear Guard (High Load) Epoxy
Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives.
Density 2.15 g/cc
0.0777 lb/in³
ASTM D792
Solvay Specialty Polymers Algoflon® E2 PTFE (Polytetrafluoroethylene)  (discontinued **)
Data provided by the manufacturer.Pre Sintered. Type V Classification. Suspension polymer powder grade recommended for compression molding and extrusion. PTFE possesses high inertness, excellent di..
Density 2.15 g/cc
0.0777 lb/in³
ASTM D792
Solvay Specialty Polymers Algoflon® E2 BP PTFE (Polytetrafluoroethylene)  (discontinued **)
Data provided by the manufacturer.Pre Sintered. Type V Classification. Suspension polymer powder grade recommended for compression molding and extrusion. PTFE possesses high inertness, excellent di..
Density 2.15 g/cc
0.0777 lb/in³
ASTM D792
Solvay Specialty Polymers Algoflon® 1.2CSC PTFE; Superconductive Carbon Filled  (discontinued **)
Data provided by the manufacturer.1.2 wt.% Superconductive Carbon. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectric prope..
Density 2.15 g/cc
0.0777 lb/in³
Sintered moldings; ASTM D4894/D4895
3M Dyneon™ TFM™ 4220 Modified PTFE, 2% Cond. Pigm. Filled  (discontinued **)
Applications include antistat linings, seals, gaskets, moldings.Data provided by Dyneon.
Copyright © lookpolymers.com All Rights Reserved