Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Park Electrochemical Nelcote® P-670I Polyester Prepreg, 7781 E-Glass Reinforced Nelcote® P-670I is a versatile, non-styrenated/low VOC polyester resin. P670I is used in a wide variety of applications including radomes, tooling and aircraft structures.Key Features and Benefits:.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Parker Chomerics CHO-BOND 1072 Conductive Silicone Splicing Compound Conductive splicing compounds are intended for making "custom" EMI/RFI gaskets from standard CHO-SEAL® and CHO-SIL® strips. Compounds consist of Chomerics silver-bearing powders dispersed in silic.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Parker Chomerics CHO-BOND 4660 Conductive Caulk/Sealant CHO-BOND® 4660 caulking compound is a single-component, electrically conductive, paste-like material intended for EMI shielding and grounding applications. Its non-hardening characteristic makes it.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792A |
Resinoid 1340 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ISO 1183 |
Polykemi AB POLYshine PBT D201 FB60 PBT, Reinforced Information provided by Polykemi AB |
|||
Density | 2.00 - 2.30 g/cc | 0.0723 - 0.0831 lb/in³ | Average value: 2.16 g/cc Grade Count:35 |
Overview of materials for Polytetrafluoroethylene (PTFE), Extruded This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Extruded". Each property range of values reported is minimum and maximum.. |
|||
Density | 2.00 - 2.80 g/cc | 0.0723 - 0.101 lb/in³ | Apparent Density; ASTM B212 |
H.C. Starck Amperit® 110.074 Agglomerated Sintered (Mo-Mo2C) |
|||
Density | 2.00 - 2.80 g/cc | 0.0723 - 0.101 lb/in³ | Apparent Density; ASTM B212 |
H.C. Starck Amperit® 110.2 Agglomerated Sintered (Mo-Mo2C) |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D572 |
Haysite EHC Glass Reinforced Polyester Sheet, Electrical Grade (GPO1) This IEEE Class F 155ºC high strength material exhibits substantial resistance to cold flow or creep under heat and pressure. Suggested applications include motor slot wedges, washers, brush plat.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792 |
Glastic Laminates/Shapes MTS Grade MTS Fiberglass-Reinforced Polyester Rod Data provided by Glastic Corporation.A continuous-filament fiberglass-roving provides superior strength. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Schott G018-307 Dental Glass Remarks: Zr-containing, very low refractive indexApplication: CompositeAdvantagesGreater variety of composition and refractive indiciesOutstanding transparencyBest radiopacitiesInformation Provided .. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | Real Density |
SGL Carbon Group CF 270 Graphite Filler Good mechanical strength, good sliding properties, high temperature resistance, high thermal shock resistance, low wettability, high corrosion resistance, high thermal conductivity, high purity, and.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Specialty Materials 5521 Boron Epoxy Prepreg Tape Specialty Materials' 5521 is a highly advanced prepreg tape, combining Specialty Materials' 4.0 or 5.6 mil boron filament with a tough, rigid, epoxy resin. Performing at temperatures up to 350°F,.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Saint-Gobain Chemfab® 3 Premium PTFE-Coated Glass Description: Chemfab® Premium Series combines a superior quality glass fabric with a high level of PTFE content. Description: Chemfab® Premium is an excellent multi-purpose fabric with a smoot.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792 |
Techmer ES HiFill® TPX-PBT-98010 BN069 Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: High DensityAppearance: Light BeigeProcessing Method: Injection MoldingInformation provided by TP C.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | LE 4460; ASTM D792 |
Borealis Visico™ LE4421/LE4460/LE4437 Scorch Retardant, Moisture-Crosslinking Polyethylene Compound for Low Voltage Installation Visico LE4421/LE4460/LE4437 is a natural, halogen-based, moisture-induced crosslinking polyethylene compound that is designed for use as low voltage wire insulation and jacketing. The combination o.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | LE 4460; ASTM D792 |
Borealis Visico™ LE4423/LE4460/LE4437 Scorch Retardant, Moisture-Crosslinking Polyethylene Compound for Low Voltage Installation Visico LE4423/LE4460/LE4437 is a natural, halogen-based, moisture-induced crosslinking polyethylene compound that is designed for use as low voltage wire insulation and jacketing. The combination o.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Cosmic Plastics CP7311 Epoxy Molding Compound Data provided by the manufacturer. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Cosmic Plastics E4930 Mineral & Glass Filled Epoxy Molding Compound, Encapsulated Grade Data provided by the manufacturer. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Loctite® 5420 Heat Cure Form-In-Place Electrically Conductive Silicone Sealant Electrically Conductive Bonders and Gasketing and Wire TackersLoctite® Electrically Conductive Adhesives are used in a variety of applications where electrical connectivity is needed, providing a c.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | Cured |
Chesterton ARC 988 Composite Description: A high performance, quartz reinforced composite designed to resurface and restore concrete surfaces, to protect new concrete, and to repair concrete damaged by severe chemical and physi.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | Filament Property. |
Cytec Thornel® Mat VMD Carbon Fiber Data provided by the manufacturer, Amoco Performance Products, Inc.Form of mat VMA with shorter fibers for injection molding. Fiber lengths average 400 µm - adequate for good property improvement... |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | Filament Property. |
Cytec Thornel® Mat VME Carbon Fiber Data provided by the manufacturer, Amoco Performance Products, Inc.Form of mat VMA with shorter fibers for injection molding. Fiber lengths average 200 µm - inadequate for good mechanical property.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
3M Dyneon™ PFE 191TZ High Temperature Perfluoroelastomer 3M™ Dyneon™ PFE 81TZ, PFE 131TZ and PFE 191TZ are technically advanced high temperature perfluorelastomers (HT PFE). They are designed to meet the challenges of higher temperature applications. Th.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792A |
Resinoid 1320 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792A |
Resinoid 1324 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Cosmic Plastics CP7312 Epoxy Molding Compound Data provided by the manufacturer. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | Cured |
Chesterton MRS 10 Metal Rebuilding System Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance It is non-sagging, non-shrinking and 10.. |
|||
Density | 2.00 g/cc | 0.0723 lb/in³ | |
Cosmic Plastics CP7314 Epoxy Molding Compound Data provided by the manufacturer. |