Polymer Property : Density = 0.0679 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.88 g/cc	0.0679 lb/in³
Polystrand ThermoBallistic™ TBE8010X X-Ply Cross-Ply Polypropylene-Glass Composite 2-Ply with Fiber Orientation at 0° & 90°.. Polystrand ThermoBallistic laminates combine continuous E-Glass (ThermoBallistic-E™) structural fibers with a proprietary polypropylene thermoplastic po..
Density	1.88 g/cc	0.0679 lb/in³
Polystrand ThermoBallistic™ TBS8010X X-Ply Cross-Ply Polypropylene-Glass Composite 2-Ply with Fiber Orientation at 0° & 90°.Polystrand ThermoBallistic laminates combine continuous S-Glass (ThermoBallistic-S™) structural fibers with a proprietary polypropylene thermoplastic poly..
Density	1.88 g/cc	0.0679 lb/in³
Cookson Group Plaskon® SMT-B-1™ Epoxy Molding Compound for PBGAs (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.An epoxy molding compound optimized specifically for grid arrays (BGA/LGA). It is formulated with a unique resin system that min..
Density	1.88 g/cc	0.0679 lb/in³
Cookson Group Plaskon® SMT-B-1LV Epoxy Molding Compound for PBGAs (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.An epoxy molding compound optimized specifically for grid arrays (BGA/LGA). Using an improved optimized filler system, it provide..
Density	1.88 g/cc	0.0679 lb/in³
Cookson Group Plaskon® SMT-B-1RC (146.403) Epoxy Molding Compound for PBGAs (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.An epoxy molding compound optimized specifically for PBGA applications. It has the same unique resin system as SMT-B-1, which mi..
Density	1.88 g/cc	0.0679 lb/in³
Cookson Group Plaskon® SMT-B-1 LAS (146.408) Epoxy Molding Compound for PBGAs (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.An epoxy molding compound optimized specifically for grid arrays (BGA/LGA) requiring low alpha particle count. It is formulated ..
Density	1.88 g/cc	0.0679 lb/in³
Cookson Group Plaskon® ULS-12HLG Epoxy Encapsulant (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.A state-of-the-art, ultra low stress epoxy encapsulant designed for packaging large, stress-sensitive DIPs, PLCCs and QFPs. It i..
Density	1.88 g/cc	0.0679 lb/in³
Cookson Group Plaskon® ULS-12 Epoxy Encapsulant (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.A state-of-the-art, ultra low stress epoxy encapsulant designed for packaging large, stress-sensitive DIPs, PLCCs and QFPs. It i..
Density	1.88 g/cc	0.0679 lb/in³
Cookson Group Plaskon® ULS-12LA Molding Compound (discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.An ultra low stress, low alpha emission molding compound designed for packaging stress-sensitive memory devices such as TSOPs and..
Density	1.88 g/cc	0.0679 lb/inÂ³	ISO 1183
Hexion KeripolÂ® RZ 1141 Polyester Molding Compound, High Surface Quality Polyester molding compound, organically/inorganically filled, glass fiber reinforced, styrene free, very slight post shrinkage, processing shrinkage as for phenolic molding compounds, high surface q..
Density	1.88 g/cc	0.0679 lb/inÂ³	ASTM D891
Solvay Specialty Polymers FOMBLINÂ® LC80 PFPE Lubricant FOMBLIN LC perfluoropolyether fluids have the following unique features: excellent wear characteristics; very good low temperature properties; cost-effective; and outstanding for applications requir..
Density	1.88 g/cc	0.0679 lb/inÂ³	ASTM D891
Solvay Specialty Polymers FOMBLINÂ® Y L-VAC 06/6 PFPE Pump Oil FOMBLIN Y fluids are a mixture of fluorinated polymers obtained by a photochemical process that begins with hexafluoropropylene. Since the FOMBLIN chemical chain contains only carbon, fluorine, and..
Density	1.88 g/cc	0.0679 lb/inÂ³	ASTM D891
Solvay Specialty Polymers FOMBLINÂ® Y06/6 PFPE Lubricant FOMBLIN Y perfluoropolyether fluids have the following unique features; excellent high temperature stability; good low temperature properties; very good E.P. and wear characteristics; good evaporati..
Density	1.88 g/cc	0.0679 lb/in³	Cured
Chesterton ARC 791 Composite Description: A quartz reinforced composite designed to resurface and restore concrete surfaces, to protect new concrete, and to repair concrete damaged by chemical and physical abuse. ARC 791 has ex..
Density	1.88 g/cc	0.0679 lb/in³	Fiber Density
Cytec Thornel® VCB-20 Carbon Fiber Cloth Data provided by the manufacturer, Amoco Performance Products, Inc.Used as a reinforcement in structural, ablative, and abrasion-resistant composites.2000 filaments/strand, 99+% carbon assayThornel®..
Density	1.88 g/cc @Temperature 23.0 °C	0.0679 lb/in³ @Temperature 73.4 °F	DIN 53 479
Ensinger TECASINT 8001 Polytetrafluoroethylene (PTFE) + Polyimide, 20% (PI) TECASINT is a range of non-melting high temperature polyimides characterized by high strength over a wide range of temperatures, good long term thermal stability, minimal thermal expansion and excel..
Density	1.88 g/cc	0.0679 lb/in³	ASTM D792
Ensinger Tecatron® XP-76 Compression Molded PPS Compound, 55% PTFE Filled Seal Material Ensinger Special Polymers has over twenty different grades of TECATRON PPS available. Custom formulations can be blended to suit specific applications. Compression molding is amenable to short run p..
Density	1.88 g/cc	0.0679 lb/in³	ASTM D1480
Donnelly Bros HT 500 High Temperature Mold Grease White. Slight odor. Use caution when handling. Light caramel-like texture. Does not migrate, works well in constant metal temperature of 250° F to 500° F. (Note: The plastic molding material ..
Density	1.88 - 1.92 g/cc	0.0679 - 0.0694 lb/in³	IEC 60811
Fainplast Compounds HAX HF 087/2 Halogen Free PVC Filling and bedding
Density	1.88 - 1.92 g/cc	0.0679 - 0.0694 lb/in³	ISO 1183
Fainplast Compounds Hax™ HFC 0115/1 Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:Bedding for tandem extrusion onlyInformation provided by Fainplast Compounds
Density	1.88 - 1.92 g/cc	0.0679 - 0.0694 lb/in³	ISO 1183
Fainplast Compounds Hax™ HFC 087/2 Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:Bedding for tandem extrusion onlyInformation provided by Fainplast Compounds
Density	1.88 g/cc	0.0679 lb/in³	ASTM D792
Applied Composites 8072 Polyester SMC Industry Application: TransportationProduct Application: AutomotiveDistinct Features: Zero Shrink, Superior Class A Finish, Improved Impact, Accepts Mold CoatingInformation provided by Applied Compo..
Density	1.88 g/cc	0.0679 lb/in³	ASTM D-792
Sumitomo Bakelite North America FM 4004 Fiberglass and Mineral Reinforced Phenolic Novolac FM 4004 is a fiberglass and mineral reinforced phenolic novolac compound. This compound exhibits excellent dimensional stability and good strength at elevated temperatures, and conforms to the requ..
Density	1.88 g/cc	0.0679 lb/in³	ASTM D-792
Sumitomo Bakelite North America FM 4004F Fiberglass and Mineral Reinforced Phenolic Novolac FM 4004F is a fiberglass and mineral reinforced phenolic novolac compound with improved strength properties over FM 4004. This compound exhibits excellent dimensional stability and good strength at..
Density	1.88 g/cc	0.0679 lb/in³	ISO 1183
Sumitomo Bakelite North America RX® 865M Fiberglass Reinforced Phenolic Novolac RX 865M is a fiberglass reinforced phenolic novolac compound, featuring dimensional stability, moderate impact resistance, and good strength and modulus.Information supplied by Sumitomo Bak North Am..
Density	1.88 g/cc	0.0679 lb/in³	Relative Density; ISO 1183
Sumitomo Bakelite North America RX® 865M Novolac Phenolic Fiberglass reinforced phenolic novolac compound featuring dimensional stability, moderate impact resistance, good strength and modulus.Information provided by Vyncolit, a Sumitomo Bak Group
Density	1.88 g/cc	0.0679 lb/in³	ASTM D792
Rostone Rosite® 4030FS SMC Thermoset Polyester, 30% Glass Reinforced (discontinued **) Key Features: "Zero Shrink" Grade±1/4 mil shrinkage. Provides surface smoothness for uses such as auto headlamp retainers. High impact and flexural strength combined with dimensional accuracy.Inf..