Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Density = 0.0658 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Density 1.82 g/cc
0.0658 lb/in³
ASTM D792
Owens Corning Glass Fiber Reinforced Polyester BMC (Injection), 22 wt.% glass
Polyester thermosets are available in many formulations. They can be formulated for good to excellent resistance to acids, weak alkalis, and organic solvents. However, they are not recommended for u..
Density 1.82 g/cc
0.0658 lb/in³
ASTM D792
Owens Corning Glass Fiber Reinforced Polyester SMC (Compression), 22 wt.% glass
Polyester thermosets are available in many formulations. They can be formulated for good to excellent resistance to acids, weak alkalis, and organic solvents. However, they are not recommended for u..
Density 1.82 g/cc
0.0658 lb/in³
ASTM D792
Quantum Composites Lytex® 9063 63% Glass Fiber Epoxy SMC
Lytex 9063 is a high performance, glass fiber reinforced epoxy sheet molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention..
Density 1.82 g/cc
0.0658 lb/in³
Cookson Group Plaskon® 3400 Epoxy Molding Compound  (discontinued **)
Test specimens were transfer molded and post cured 4 hours at 175°C.A reduced-stress epoxy molding compound for the encapsulation of a variety of semiconductor devices ranging from small lead count..
Density 1.82 g/cc
0.0658 lb/in³
LATI Latamid 66 H2 G/25-V0CT4 PA 66, 25% Glass Fiber Reinforced, Heat Stabilized, Flame Retardant
Polyamide 66 (PA66) based compound. Heat stabilized. Glass fibers. UL94 V-0 classified, with brominated flame retardants, PBB/PBDE free. Availability: Africa & Middle East; Asia Pacific; Europe; Lat..
Density 1.82 g/cc
0.0658 lb/in³
SGL Carbon Group EK 200 Graphite
Good mechanical strength, good sliding properties, high temperature resistance, high thermal shock resistance, low wettability, high corrosion resistance, high thermal conductivity, high purity, and..
Density 1.82 g/cc
0.0658 lb/in³
SGL Carbon Group EK 2201 Carbon Graphite
Good mechanical strength, good sliding properties, high temperature resistance, high thermal shock resistance, low wettability, high corrosion resistance, high thermal conductivity, high purity, and..
Density 1.82 g/cc
0.0658 lb/in³
Fiber Density
SGL Carbon Group SIGRAFIL C® C30 S003 GLY Staple Carbon Fiber, Glycerine Sizing
In its precision cut staple form SIGRAFIL C is a superior free-flowing material suitable for low and high temperature thermoplastic injection-molding processes. It is also an excellent way of making..
Density 1.82 g/cc
0.0658 lb/in³
Fiber Density
SGL Carbon Group SIGRAFIL C® C30 S012 GLY Staple Carbon Fiber, Glycerine Sizing
In its precision cut staple form SIGRAFIL C is a superior free-flowing material suitable for low and high temperature thermoplastic injection-molding processes. It is also an excellent way of making..
Density 1.82 g/cc

@Temperature 25.0 °C
0.0658 lb/in³

@Temperature 77.0 °F
Solvay Specialty Polymers Galden® HS240 PFPE VPS Fluid
Galden® LS and HS grades are specifically recommended for vapor phase soldering.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of servic..
Density 1.82 g/cc
0.0658 lb/in³
Specialty Materials Hy-Bor 100 Boron/Graphite Hybrid Prepreg Tape
Lower cost Hy-Bor version. Combining Specialty Materials' boron fiber with graphite prepreg, Hy-Bor® is a high-performance material with exceptional properties. Available with 4.0 and 5.6 m..
Density 1.82 g/cc
0.0658 lb/in³
ISO 1183
Stir SpA IN 3500 AF CZ (PVC)
Application: Extrusion flame resistant ecological fillerInformation provided by STIR SpA
Density 1.82 g/cc
0.0658 lb/in³
UCAR Carbon UCAR® CGW Isostatic Molded Graphite
Isostatically molded grade CGW is an ATJ-based material that has been processed to higher density and strength. Grade CGW is characterized by low permeability, erosion resistance and surface hardnes..
Density 1.82 g/cc
0.0658 lb/in³
Cosmic Plastics 6130F Long Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound
Data provided by the manufacturer.
Density 1.82 g/cc
0.0658 lb/in³
ASTM D792
Plenco 5118 Phenolic, Granular, Injection Molded
PLENCO 05118 is a mineral and graphite filled phenolic molding compound, formulated for bearing seals. 05118 provides for a low coefficient of friction, abrasion resistance, minimal water absorptio..
Density 1.82 g/cc
0.0658 lb/in³
ISO 1183
DSM Stanyl® TE250F9 (DAM) Nylon 46 45% Glass Reinforced, Heat Stabilized, Flame Retardant (North America)
Information provided by DSM Engineering Plastics.
Density 1.82 g/cc
0.0658 lb/in³
ISO 1183
DSM Stanyl® TE250F9 Nylon 46-45% Glass Reinforced (European and Asian Grade) (Dry)
Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Density 1.82 g/cc
0.0658 lb/in³
ISO 1183
Eurotec® Tecodur® PB70 KK45 NL XA 20 PBT 45% glass fiber/mineral reinforced, UL94 V0, low warpage
Excellent stiffness and hardnessGood mechanical strengthGood creep and fatigue behaviorVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance..
Density 1.82 g/cc
0.0658 lb/in³
Liquid
3M Fluorinert™ FC-3283 Electronic Liquid
3M™ Fluorinert™ Liquid FC-3283 is a non-conductive, thermally and chemically stable liquid ideal for use in single phase heat transfer applications, especially in the electronics and semiconductor..
Density 1.82 g/cc
0.0658 lb/in³
Bond Laminates TEPEX® dynalite 108-FG290(x)/45% Filament Glass – TPU Consolidated Composite Laminate
Within the TEPEX® composite laminate, TPU distinguishes itself from alternative resin systems by its specific physical properties. The TPU resin is tough which results in an excellent impact and ea..
Density 1.82 g/cc
0.0658 lb/in³
DIN 53 47
Albis Plastics Tedur® L 9560 PPS, 50% Mineral
High Gloss, Highest Surface Finish, Metallization w/o Base Coating. Incandescent wire resistance (2 mm) is 960°C per VDE 0471 T1.2.Applications: Various High Temperature ReflectorsProcessing: Inje..
Density 1.82 g/cc
0.0658 lb/in³
Magnesium Elektron Elektron® 21 Magnesium Casting Alloy
Fully heat treatable alloy for use up to 400°F. Excellent corrosion resistance and castability. Cast products possess a fine-grained microstructure and pressure tightness. Easily machined. Usual ..
Density 1.82 g/cc
0.0658 lb/in³
ASTM D-792
Sumitomo Bakelite North America FM 4009 Fiberglass Reinforced Phenolic Novolac
FM 4009 is a fiberglass reinforced phenolic novolac molding compound formulated for excellent wear resistance.Information supplied by Sumitomo Bak North America.
Density 1.82 g/cc
0.0658 lb/in³
Cosmic Plastics 6130 Long Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound
Data provided by the manufacturer.
Density 1.82 g/cc
0.0658 lb/in³
Cosmic Plastics 6230F Long Glass Fiber Filled Iso Diallyl Phthalate Molding Compound
Data provided by the manufacturer.
Copyright © lookpolymers.com All Rights Reserved