Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.957 g/cc | 0.0346 lb/in³ | ISO 1183 |
SABIC FI1157 Bimodal High Density Polyethylene for Blown Film Product Description: FI1157 is a high molecular weight high density polyethylene copolymer grade specifically designed for blown film applications. Its high molecular weight, broad molecular weigh.. |
|||
Density | 0.958 - 0.962 g/cc | 0.0346 - 0.0348 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 2260M (601F7) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ASTM D 792 |
NOVA Chemicals Sclair® 19C (High Gloss) HDPE Blow Molding Resin 19C complies with the U.S. FDA specifications for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food, without te.. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ASTM D792 |
NOVA Chemicals Sclair® 58G (High Gloss) HDPE Blow Molding Resin
(discontinued **) Features: Outstanding gloss, pearlescent finish when colored, good processability.Applications: Small part blow molding, injection blow molding, low-moderate ESCR uses.Data provided by the manufactu.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | ISO 1183 |
Total Finathene® 6002 HDPE, blow molding, pipe
(discontinued **) FINATHENE® 6002 is a high density polyethylene produced by the slurry loop low pressure polymerization process. FINATHENE® 6002 has been especially developed for the manufacturing of toys and of b.. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ASTM D 792 |
Total Finathene® 3407B Black HDPE pipe grade
(discontinued **) Applications: industrial and mining gas distribution, potable water, sewer and sewer relining, gas and oil gathering, fiber optic innerduct, general pipe reliningInformation provided provided by To.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | ISO 1183 |
Total Lacqtene® 2005 TN 59 HDPE pipe
(discontinued **) LACQTENE® 2005 TN 59 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer. LACQTENE® 2005 TN 59 is best processed between 190 and 230°C.Informa.. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ASTM D 792 |
NOVA Chemicals Sclair® 2906 HDPE Injection Molding Resin NOVA Chemicals' polyethylene resins are chemically and biologically inert.Features: Excellent toughness and impact resistance, High stiffness, Excellent processing stability, High GlossAdditives: .. |
|||
Density | 0.957 g/cc | 0.0346 lb/in³ | ASTM D792 |
NOVA Chemicals Sclair® 58A/58A-DE3 HDPE Blow Molding Resin Features: Good ESCR, high stiffness, good impact strength.Applications: Small part blow molding, HIC containers, food, pharmaceuticals.Data provided by the manufacturer. |
|||
Density | 0.957 g/cc | 0.0346 lb/in³ | ASTM D792 |
Global R-1760 High Density Polyethylene, Injection Molding Grade
(discontinued **) Description-opacity, medium high stiffness, good impact strength, good chemical resistanceApplications- auto parts, bottles, housewares, drums, containers, bottlesMeets FDA requirements as listed in.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | ASTM D792 |
LyondellBasell Alathon® L5906 High Density Polyethylene ApplicationsALATHON XL 5906 is a high molecular weight high density polyethylene homopolymer with a broad bimodal molecular weight distribution. This resin exhibits excellent stiffness, very high t.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | ISO 1183 |
FKuR Kunststoff Terralene® HD 3505 Biobased Polyethylene With the brand name Terralene® FKuR offers biobased polyethylene compounds made using Braskem's Green PE. When compared to conventional polyethylene (PE), the main difference is that the ethanol.. |
|||
Density | 0.959 - 0.965 g/cc | 0.0346 - 0.0349 lb/in³ | ASTM D792-98 |
Ipiranga Petrochem GD 5160 HDPE IPQ produces High Density Polyethylene (HDPE) for use by different segments of the plastics molding industry in several processes, including blow molding, extrusion and injection molding.To produce .. |
|||
Density | 0.959 - 1.01 g/cc | 0.0346 - 0.0364 lb/in³ | |
Lord Adhesives 551 Very Low Viscosity, Adhesive Thinner, Medium Cure Acrylic Adhesive Lord 500 SeriesLord 500 Series Acrylic Adhesives bond plastics and prepared metals; they offer excellent adhesion to both thermoplastics and thermoset plastics. They are available with varying handi.. |
|||
Density | 0.959 - 0.983 g/cc | 0.0346 - 0.0355 lb/in³ | |
Lord Adhesives Flocklok® Catalyst 1 Flocklok Catalyst 1 will accelerate the cure rate of Flocklok adhesives and will not diminish the work life, unless exposed to moisture. There is minimal impact on VOC levels, as low levels of the c.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | Mixed |
ITW Plexus Plexusâ„¢ MA556 Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.Standard for structural bonding in the marine industry.Information provided by Illinois Tool Works.. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ASTM D792 |
LyondellBasell Alathon® L5885 High Density Polyethylene ApplicationsALATHON L 5885 is a medium molecular weight high density homopolymer for use in blown film applications. Typical applications include those low WVTR requirements.Regulatory StatusL 5855.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | Mixed |
ITW Plexus Plexusâ„¢ MA555 Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.Low exotherm adhesive able to be used 1" thick.Information provided by Illinois Tool Works. |
|||
Density | 0.957 g/cc | 0.0346 lb/in³ | |
JPJ Technologies 3000j/JE HDPE Injection Information provided by JPJ Technologies |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | ISO 1872-2/ISO 1183 |
Borealis BorSafe™ HE3494-LS-H HDPE Compound for Pressure Pipes BorSafe™ HE3494-LS-H is a bimodal polyethylene compound produced by the advanced Borstar® technology. It includes a combination of pigments and stabilizers to ensure excellent long-term thermal s.. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ISO 1183 |
Borealis BS2581 High Density Polyethylene for Blow Molding BS2581 is a high density polyethylene intended for blow molding products with high stiffness and very good environmental stress crack resistance (ESCR). Applications: industrial chemicals, househol.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | compound; ISO 1872-2/ISO 1183 |
Borealis BorSafe™ HE3490-LS-H HDPE Compound for Pressure Pipes BorSafe™ HE3490-LS-H is a bimodal polyethylene compound produced by the advanced Borstar® technology. It includes a combination of pigments and stabilizers to ensure excellent long-term thermal s.. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ISO 1183 |
Borealis Borstar® BB2581 HDPE for Blow Molding Borstar BB2581 is a high-density polyethylene intended for blow molding of products with high stiffness and very good environmental stress crack resistance (ESCR).Borstar BB2581 is recommended for h.. |
|||
Density | 0.957 g/cc | 0.0346 lb/in³ | ExxonMobil method |
ExxonMobil Escorene™ UL 02133EN2 Ethylene Vinyl Acetate Copolymer (European Grade) Product Description: UL 02133EN12 is a copolymer of ethylene and vinyl acetateAvailability: Africa & Middle East and Europe Additive: Antiblock: NoSlip: No Thermal Stabilizer: NoFree Flowing Agent:.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | Natural resin extruded under proper conditions with black masterbatch DFNF-0092 (6.5%); ASTM D792 |
Dow CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin CONTINUUM™ DGDA-2490 NT is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistan.. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | ExxonMobil Method |
ExxonMobil HD 7845.30 MMW Blown Film Resin Product Description: HD 7845.30 can be processed on high stalk, pocket extrusion or cast lines. Films made from HD 7845.30 exhibit an excellent stiffness balance. High thermal stability provides exc.. |
|||
Density | 0.959 g/cc | 0.0346 lb/in³ | Part B |
Abatron Ferrobond-L™ Steel-Filled, Structural Adhesive Putty; Liquid Ferrobond-L™ is a fluid pourable Ferrobond-P™. Casting version of Ferrobond-P™. Choose when flowing consistency is needed for pouring. Excellent for tooling. Technical Characteristics: A: 23 lbs.. |
|||
Density | 0.957 g/cc | 0.0346 lb/in³ | ASTM-D792 |
Braskem GM5240PR HDPE High Density Extrusion Polyethylene GM5240PR is a high-density polyethylene compound specially developed for the manufacturing of pipes, underground conduits, and steel pipe coating. This resin is produced with bimodal technology and .. |
|||
Density | 0.958 g/cc | 0.0346 lb/in³ | Exxon Method |
ExxonMobil Escorene® HD-7835 MMW-HDPE Blown Film Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A medium molecular weight HDPE blown film resin. Films made from the HD-7835 exhibit an excellent stiffness balance. HD-7835 is particularly recom.. |
|||
Density | 0.957 g/cc | 0.0346 lb/in³ | ASTM D792-ISO 1183 |
DuPont Elvax® 150W-LG Ethylene Vinyl Acetate
(discontinued **) DuPont™ Elvax® 150W-LG is an ethylene-vinyl acetate copolymer resin containing an anti-blocking additive for use in industrial applications. This resin is supplied in pellet form and to prevent th.. |