Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.0960 g/cc | 0.00347 lb/in³ | |
Pyrotek T-1 Low-Temperature Felt A dark brown, very strong and tough material.Dimensions610 mm x 30.5 m 6 mm thickApplicationsHigh-temperature reusable gasketsInformation provided by Pyrotek. |
|||
Density | 0.0960 g/cc | 0.00347 lb/in³ | |
Pyrotek L-6 Fiberseal Blanket Lightweight, yet strong and durable needled blankets.Dimensions610 mm x 7.6 m1219 mm x 7.6 m6 - 51 mm thickApplicationsFurnace linings Gaskets Expansion joints Fire blanket Fire pillowsInformation p.. |
|||
Density | 0.0960 g/cc | 0.00347 lb/in³ | |
Pyrotek M-6 Fiber Seal Pre-cut Gasket Contains no binders and is not changed by exposure to high temperatures.Information provided by Pyrotek. |
|||
Density | 0.0961 - 0.192 g/cc | 0.00347 - 0.00694 lb/in³ | |
Mid-Mountain Materials PADMAT® MT1000 Needled Fiberglass Mat Description: PADMAT® MT1000 fiberglass mat is comprised of high purity, high strength E-Glass fibers. These long fibers are mechanically needled into high strength, binderless insulation material.. |
|||
Density | 0.0960 g/cc | 0.00347 lb/in³ | 3.6 minute residence time pre-expander |
Jackon JACKOCELL® S332 Expanded Polystyrene Packaging and Shape Molding 100% Polystyrene.Pre-expansionThis is the low pentane version for densities above 25-30 kg/m3. A substantial reduced pentane emission has been made possible with S332 which will lead the industry in.. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | ASTM D1056 |
Monmouth Rubber & Plastics Durafoamâ„¢ S88 PVC/NBR Information provided by Monmouth Rubber & Plastics Corp. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | |
Unifrax Fiberfrax® PH Blanket Ceramic Fiber Insulator Fiberfrax PH blanket is a unique product that has been specifically designed to provide excellent filtration capabilities in addition to the high chemical stability and low thermal conductivity that.. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | Nominal |
Unifrax FyreWrap® Elite™ 1.5 Duct Insulation Grease Duct ASTM E2336 System Unifrax's FyreWrap ™ 1.5 Duct Insulation is a two-layer flexible enclosure for one- and two-hour rated commercial kitchen grease ducts and hazardous exhaust ducts including chemical fume ducts. Fy.. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | Nominal |
Unifrax FyreWrap® Elite™ 1.5 Duct Insulation Grease Duct Single-Layer System Insulation Unifrax's FyreWrap ™ 1.5 Duct Insulation is a single-layer flexible enclosure for 1- and 2-hour fire-rated commercial kitchen grease ducts and hazardous exhaust ducts including chemical fume ducts... |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | Nominal |
Unifrax FyreWrap® Elite™ 1.5 Duct Insulation Ventilation Air Duct (VAD) System Unifrax's FyreWrap ™ 1.5 Duct Insulation is a single-layer flexible duct wrap enclosure for 1- and 2-hour fire-rated ventilation air ducts (VAD). Typical duct types include smoke control, stairwel.. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | |
Unifrax FyreWrap® EZ 1.5 Duct Insulation Ventilation Air Duct (VAD) System Unifrax's FyreWrap® EZ 1.5 Duct Insulation is a new optimized single-layer flexible enclosure for 1- and 2-hour fire-rated ventilation air ducts (VAD). Typical duct types include smoke control, st.. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | |
Hexcel® HexWeb® HRH-10 - 3/16 - 6.0 Aramid Fiber/Phenolic Resin Honeycomb Designation: Material-Cell Size-Density.Hexweb HRH-10 is manufactured from NOMEX aramid fiber sheets. A thermosetting adhesive is used to bond these sheets at the nodes, and after expanding to the h.. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | |
Hexcel® HexWeb® HRH-327 - 3/16 - 6.0 Fiberglass Reinforced Polyimide Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb® HRH-327 is a glass-fabric, bias weave reinforced plastic honeycomb that incorporates a polyimide resin system for the node adhesive as well a.. |
|||
Density | 0.0961 g/cc | 0.00347 lb/in³ | |
Hexcel® HexWeb® CFC™-20-1/8-6.0 Composite Flooring Honeycomb Core Hexweb CFC™-20 is manufactured from NOMEX aramid fiber sheets. A thermosetting adhesive is used to bond these sheets at the nodes and, after expanding to the hexagonal confiation, the block is dipp.. |
|||
Density | 0.0960 g/cc | 0.00347 lb/in³ | |
Pyrotek M-3 Fiber Seal Pre-cut Gasket A resin-coated felt. Repels water.Information provided by Pyrotek. |